Re: Where did the modulation go . . .


ab9ca@...
 

OK, it looks like ambeserver is running. 


I tried to kill it but it would not die. It kept changing its PID. 


So I did the:


sudo systemctl disable dstarrepeaterd@1
sudo systemctl mask dstarrepeaterd@1


and then rebooted.


Then ran the following:


pi@compass:~ $ sudo systemctl status dstarrepeaterd@1 ircddbgatewayd ● dstarrepeaterd@1.service Loaded: masked (/dev/null) Active: inactive (dead) Nov 29 05:45:54 compass systemd[1]: Stopped dstarrepeaterd@1.service. ● ircddbgatewayd.service - D-STAR Gateway Daemon Loaded: loaded (/lib/systemd/system/ircddbgatewayd.service; enabled) Active: inactive (dead) since Tue 2016-11-29 05:45:54 UTC; 1min 11s ago Process: 560 ExecStart=/usr/sbin/ircddbgatewayd (code=killed, signal=TERM) Main PID: 560 (code=killed, signal=TERM) Nov 29 05:43:25 compass systemd[1]: Started D-STAR Gateway Daemon. Nov 29 05:45:54 compass systemd[1]: Stopping D-STAR Gateway Daemon... Nov 29 05:45:54 compass systemd[1]: Stopped D-STAR Gateway Daemon. pi@compass:~ $ pi@compass:~ $ pi@compass:~ $ sudo gpio readall +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 2 | 8 | SDA.1 | ALT0 | 1 | 3 || 4 | | | 5V | | | | 3 | 9 | SCL.1 | ALT0 | 1 | 5 || 6 | | | 0v | | | | 4 | 7 | GPIO. 7 | IN | 0 | 7 || 8 | 1 | ALT5 | TxD | 15 | 14 | | | | 0v | | | 9 || 10 | 1 | ALT5 | RxD | 16 | 15 | | 17 | 0 | GPIO. 0 | IN | 0 | 11 || 12 | 0 | ALT0 | GPIO. 1 | 1 | 18 | | 27 | 2 | GPIO. 2 | OUT | 0 | 13 || 14 | | | 0v | | | | 22 | 3 | GPIO. 3 | OUT | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 | | | | 3.3v | | | 17 || 18 | 0 | OUT | GPIO. 5 | 5 | 24 | | 10 | 12 | MOSI | ALT0 | 0 | 19 || 20 | | | 0v | | | | 9 | 13 | MISO | ALT0 | 0 | 21 || 22 | 1 | IN | GPIO. 6 | 6 | 25 | | 11 | 14 | SCLK | ALT0 | 0 | 23 || 24 | 1 | OUT | CE0 | 10 | 8 | | | | 0v | | | 25 || 26 | 1 | OUT | CE1 | 11 | 7 | | 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 | | 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | | | 6 | 22 | GPIO.22 | OUT | 0 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 | | 13 | 23 | GPIO.23 | OUT | 1 | 33 || 34 | | | 0v | | | | 19 | 24 | GPIO.24 | ALT0 | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 | | 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | ALT0 | GPIO.28 | 28 | 20 | | | | 0v | | | 39 || 40 | 0 | ALT0 | GPIO.29 | 29 | 21 | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+ pi@compass:~ $ pi@compass:~ $ pi@compass:~ $ pi@compass:~ $ ps -ef | grep ambeserver pi 1102 1033 0 05:47 pts/0 00:00:00 grep --color=auto ambeserver


Looks like pin 7 is still an IN pin and ambeserver is still running, if I'm reading this right.


The ambeserver must be being started somewhere in the boot sequence. How do I find out where? Would the log show this?


73, dave

ab9ca/4


Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.