Re: Where did the modulation go . . .


actually TX is always on the same pin for 1200 or 9600, it's the receive that must hit the right pin.

The control that you need to play with in alsamixer is:

ADC Level (It is usually pretty forgiving)

On Mon, Dec 5, 2016 at 4:05 PM, <ab9ca@...> wrote:

Yes, it must be in order for any audio to TX. I tested at both 1200 and 9600 baud. Works only at 9600. 

73 de dave



John D. Hays

PO Box 1223, Edmonds, WA 98020-1223

Join to automatically receive all group messages.