DRAWS Board Connectors


Randy Neals
 

Hi,

I'm looking at the technical docs and trying to decipher what connectors I'm going to need to interface a DRAWS board for DC Power and I/O...
Would someone take a look at this and see if my guesses are accurate?

Power:
Schematic says XHRA-2
Decoding that, it seems like that's a JST XH Series, right-angle 2 pin.
Would this work: https://www.amazon.com/dp/B075ZZH2ZQ/

I/O:
Schematic says HDR-8
Looks like a 2x4 2.54mm (.100") pitch
Would this work: https://www.amazon.com/dp/B00X77GSZE/

Radio:
6 pin mini-din
Connector for cable: https://www.amazon.com/dp/B000LE8G56
Pre-Made Cable (Shielded): https://www.amazon.com/dp/B005J1LEZK/
Pre-Made Cable (Cheaper): https://www.amazon.com/dp/B007TZCTEE/

GPS:
SMA, but you have GPS antennas available.
But something like this seems like to work: https://www.amazon.com/dp/B00LXRQY9A/

de W3RWN
Randy
Seattle, WA

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.