toggle quoted messageShow quoted text
I don't believe so, I installed direwolf first then fldigi.
On Tue, Dec 4, 2018 at 1:25 PM Jack Spitznagel <kd4iz@...
Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?
On Dec 4, 2018, at 16:21, Bryan Hoyer <bhhoyer@...
I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.
On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...
Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf
I rebooted and Fldigi works in receive and tx as it should.
Fascinating, "With lifted Spock like eyebrows"
On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...
Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.
This is a sw issue that we’re working on.
On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...
Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.
The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications.
On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...
Or search in the group for #fldigi
On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...
I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J
John D. Hays
Science River LLC
John D. Hays