Re: No Transmit Audio #draws #direwolf #xastir

Jack Spitznagel

Hi Bill,

I thought of that, but it happened from both 1200 and 9600 ports - there is no sound, not even noise. I know what the 9600 bursts sound like... years ago, I ran an Ottawa PI card.

Jack Spitznagel

-----Original Message-----
From: <> On Behalf Of Bill Vodall
Sent: Tuesday, December 11, 2018 21:10
Subject: Re: [udrc] No Transmit Audio #direwolf #draws #Xastir

BUT Have tried repeatedly to get transmit (from direwolf) with both FT817 and IC7000 radios. Direwolf is set up (and tries) to digipeat a packet from my Kenwood D-74 handheld. All either rig does is to key up very briefly, but transmit no audio in spite of alsamixer adjustments to LO Driver Gain and PCM level.
That sounds like you are transmitting at 9600 baud. Is that
intentional? A brief burst of static is what you'll hear.


J Spitznagel
Science River LLC

Join to automatically receive all group messages.