On Dec 19, 2018, at 3:06 AM, f6bvp <f6bvp@...> wrote:
I did not install a battery yet in my DRAWS hat. None of the button batteries I have in stock fits into the case. Could someone give me a model reference or number.
Bernard
Le 19 déc. 2018 à 07:20, Basil Gunn <basil@...> a écrit :
From some google-fu:
Note that the chrony service does not change the time. The often misconception is that the chrony service is setting the time to the one given by the NTP server. This is incorrect – what actually happens is that based on the answer from the NTP server, chrony just tells the system clock to go faster or slower. For this reason, sometimes even though the time is wrong and the NTP server is working, the time does not get corrected immediately.
If your system time is off by a lot you can try this. To step the system clock immediately, bypassing any adjustments in progress by slewing, issue the following command as root:
Also send me the console output from this script. https://github.com/nwdigitalradio/n7nix/blob/master/gps/verify_time.sh
/Basil
Gayland Gump <kg7gcf@...> writes:
I believe it ran for a few hours without the update, in fact I was surprised when I finally noticed that the date and time were so off. I did not do anything with chrony nor the gps other than install the battery and hooked up the antenna.
Gayland KG7GCF
On Tue, Dec 18, 2018 at 5:56 PM Basil Gunn <basil@...> wrote:
FYI, I installed a battery before I first powered up the DRAWS but the time did not update even with a network connection and the gps antenna installed.
My experience is that it can sometimes take 10 minutes for chronyd to sync. /Basil
I ended up setting it manually using the date command. Haven't been back to it to see if it has held will try to get around to that
