toggle quoted messageShow quoted text
These CR1220s work well in mine:
73!! David (KG5EIU)
On Dec 19, 2018, at 3:06 AM, f6bvp <f6bvp@...
I did not install a battery yet in my DRAWS hat.
None of the button batteries I have in stock fits into the case.
Could someone give me a model reference or number.
Le 19 déc. 2018 à 07:20, Basil Gunn <basil@...> a écrit :
From some google-fu:
Note that the chrony service does not change the time. The often
misconception is that the chrony service is setting the time to the one
given by the NTP server. This is incorrect – what actually happens is
that based on the answer from the NTP server, chrony just tells the
system clock to go faster or slower. For this reason, sometimes even
though the time is wrong and the NTP server is working, the time does
not get corrected immediately.
If your system time is off by a lot you can try this.
To step the system clock immediately, bypassing any adjustments in
progress by slewing, issue the following command as root:
Also check out entries in:
Look for "Check GPS"
Also send me the console output from this script.
Gayland Gump <kg7gcf@...> writes:
I believe it ran for a few hours without the update, in fact I was
surprised when I finally noticed that the date and time were so off. I did
not do anything with chrony nor the gps other than install the battery and
hooked up the antenna.
On Tue, Dec 18, 2018 at 5:56 PM Basil Gunn <basil@...> wrote:
FYI, I installed a battery before I first powered up the DRAWS but the
time did not update even with a network connection and the gps antenna
My experience is that it can sometimes take 10 minutes for chronyd to
I ended up setting it manually using the date command. Haven'tsoon.
been back to it to see if it has held will try to get around to that