Re: It was "fine", then... strange behavior #draws #setup #betaimage


Basil Gunn
 

So Basil should
I be following this instruction "Before verifying CORE functionality you
must have run the *app config script*" with the new DRAWS betas or has that
already been done?
On your first boot of the new image you need to follow these
instructions:
https://github.com/nwdigitalradio/n7nix/blob/master/DRAWS_CONFIG.md

You need to run ./app_config.sh core.

It will set your locale, make you change your password & host name &
auto config some other things. If you don't want packet and/or direwolf then
run:

~/bin/ax25-disable
and reboot.

If you run into problems I will ask you to do verification with direwolf
so you will need to load it again:

~/bin/ax25-enable
and reboot

/Basil

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.