toggle quoted messageShow quoted text
Next issue is with getting the radio to transmit. First off, I
have used Fldigi with the TM-V71 many times on vhf uhf with
success using a signalink and a sound cards with simple
interfaces. I noticed right of the bat that the squelch on my
radio does not stop the waterfall with the DRAWS interface...what
is that about? Using the alsa mixer control no value of ADC
changes the waterfall appearance, it doesn't dim or get brighter
with open squelch. Squelching off the signal of the radio does not
stop the water fall ??? I have never seen that before. Lastly I
cant key the radio and no value of Lo Drive Gain or PCM makes any
Do you have any suggestions ???
On 12/23/2018 5:58 PM, Jack Spitznagel
- Check to
make absolutely sure that Direwolf is not running after your
- If it is not
running, you should see PortAudio as a selectable option.
Check the box.
- Now Select
udrc: - (hw:0,0) for both capture and playback.
- You can also
check “Device supports fell duplex” (it is in mine by
default and I just left it that way)
Hope that helped.
<firstname.lastname@example.org> On Behalf Of Joseph
Sent: Sunday, December 23, 2018 16:49
Subject: Re: [udrc] amixer questions Re: Set Up Issues
#setup #fldigi #draws
I am looking for some basic guidance on
getting fldigi configured for VHF and UHF. I have been
successful with the DRAWS Beta 5 image and running
Direwolf/YAAC and now that I know the "core image" checks out
and works. I rebooted the PI/DRAWS combo and shut down
Direwolf and ax25 with this command sequence: cd bin, sudo su,
I then selected fldigi from the drop down menu on the home
screen of beta 5 image. When the configuration helper for
fldigi comes to selecting the sound card I am left with one
option and that is to select "pulseaudio" and it responds wit
no pulseaudio server. It doesn't give me an option to choose
udrc 0 or 1.
What do I do from here to get an audio source selected ???
Science River LLC