toggle quoted messageShow quoted text
You have a radio I do not know anything about. I’m only about a week ahead of you in learning how to make DRAWS sing. I just happened to have been working with fldigi and my IC-7000 and the questions you asked were central to making fldigi work with the DRAWS hat audio device and that rig.
How did you configure fldigi to key your radio? Since you are no longer using a SignaLink, you can’t rely on the SL VOX keying circuit. If you want to use VOX for PTT, the radio has to have a VOX function and it has to be set up and adjusted.
Only other approach I can think of is to make sure your radio can be controlled and/or keyed by flrig’s CAT control and set it up. Then set fldigi to control and key the radio using flrig. That seemed to work for me with my IC-7000 and Yaesu FT-817.
Sorry I can’t be more helpful.
From: firstname.lastname@example.org <email@example.com> On Behalf Of Joseph Vilardo
Sent: Sunday, December 23, 2018 20:36
Subject: Re: [udrc] amixer questions Re: Set Up Issues #setup #fldigi #draws
Next issue is with getting the radio to transmit. First off, I have used Fldigi with the TM-V71 many times on vhf uhf with success using a signalink and a sound cards with simple interfaces. I noticed right of the bat that the squelch on my radio does not stop the waterfall with the DRAWS interface...what is that about? Using the alsa mixer control no value of ADC changes the waterfall appearance, it doesn't dim or get brighter with open squelch. Squelching off the signal of the radio does not stop the water fall ??? I have never seen that before. Lastly I cant key the radio and no value of Lo Drive Gain or PCM makes any difference.
Do you have any suggestions ???
On 12/23/2018 5:58 PM, Jack Spitznagel wrote:
Science River LLC