Re: DRAWS case first draft #draws #case #cad #scad

Jack Spitznagel
 

Nice solution Brian! Which 3D printer are you using?

Jack – KD4IZ

 

From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Brian Badger
Sent: Friday, January 4, 2019 14:57
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] DRAWS case first draft #draws #case #cad #scad

 

image1.jpeg


On Jan 4, 2019, at 12:51 PM, Ed Bloom, KD9FRQ <ewbloom@...> wrote:

Do you a picture of the two halves whilst apart? and the inside of the top?

 

Ed Bloom, KD9FRQ
ewbloom@...

Sent from Webmail access

 

 

-----Original Message-----
From: Brian Badger <brian@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Fri, Jan 4, 2019 12:28 pm
Subject: Re: [udrc] DRAWS case first draft #draws #case #cad #scad

Example print.

<image1.jpeg>


On Jan 4, 2019, at 9:57 AM, Brian Badger <brian@...> wrote:

Currently waiting in thingiverse approval queue.

https://www.thingiverse.com/thing:3333435


The good:
SCAD provided so you can help tune the design
Added a powerpole power port
Stretched the case to protect the power connector

The bad:
Extraneous screw holes that can't be used with DRAWS
GPS antenna connector is a stubborn fit, so there is a big gap

The ugly:
SD card protector dimensions are just plain wrong. The card is inaccessible.

--
Brian N0KZ

<rpi3_draws.scad>

<image1.jpeg>


--
J Spitznagel
Science River LLC
KD4IZ

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.