Re: DRAWS7 does not recognize udrc or draws
Joseph Vilardo <jvilardo@...>
I ran into a similar problem. When I would run aplay -l only card 0 would show, card 1 udrc [udrc] was not displayed. I raised the question on this forum and got reply from Annaleise and Basil. Annaleise's response is what follows. If you change the order of the directive "dtparam=audio=on" in the $ /boot/config.txt file to follow the directive "dtoverlay=" and "dtoverlay=draws" reboot and run aplay -l you should see card 1 udrc load.
On 1/1/2019 7:40 PM, Annaliese McDermond wrote:
It appears to me that you have incorrect settings in your config.txt file. I will make this very explicit because I’m not sure I’ve made myself clear before: *ORDER MATTERS IN LINES IN config.txt* If you do not get the directives in the correct order, the OS kernel will not load the correct drivers for you. If you intend to use the onboard audio on the Pi, the line dtparam=audio=on *MUST* come after the lines dtoverlay= dtoverlay=draws Otherwise the device tree will not be loaded correctly and you won’t get a proper driver set. -- Annaliese McDermond (NH6Z) nh6z@...
On 1/8/2019 10:58 PM, Roderick Wayne Hart Sr. wrote: