Thanks or your quick response!
pi@draws:~/bin $ ./showudrc.sh >../showudrc
No LSB modules are available.
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
See attachement for the output of showudrc.sh
pi@draws:~/bin $ ls -al /dev/ttySC* /dev/pps*
ls: cannot access '/dev/ttySC*': No such file or directory
ls: cannot access '/dev/pps*': No such file or directory
Yes, I did the first steps, but not all of them as I do not have a radio attached, yet.
Obvisously, the HAT is not recognized, do I need the 12V supply?
73 de Christof