toggle quoted messageShow quoted text
thanks for the update.
All commands figuring out whether gps works report a normal behavior of the gps module.
However, when I tell direwolf to beacon regularly the position taken from the gpsd, nothing happens. Calling „systemctl status direwolf” shows a fault message that gps has to be configured first. So it looks as if direwolf doesn’t want to use the data of the gpsd.
Tel.: +49 (0) 70 42 8 12 42 45
Fax: +49 (0) 70 42 8 12 42 46
mobil: +49 (0) 171 45 10 711
Am 05.03.2019 um 21:04 schrieb Basil Gunn <basil@...
Thank you for sending the output to showudrc.sh
Everything looks to be OK for the DRAWS hat.
I just configured a new instance of Xastir and find the same symptom as
you do. I have a call into one of the Xastir dev's to see if we can find
a solution to this problem.
I also configured a new instance of YAAC and gps works fine through the
gpsd tcp interface with this app.
To verify gps activity from the DRAWS hat you can run either of these
commands in a console.
Rico Abagnale <rico@...
here comes the output of showudrc.sh. It’s quite long…
After the listing you can find a screenshot of the settings for the GPS. I hope that’s what you meant.
Many thanks for your help…