Re: Betas #draws #setup #beta #image

 



On Tue, Mar 5, 2019 at 3:28 PM Rico Abagnale <rico@...> wrote:
Here you are. And finally I’ve seen the missing two lines.
 
> This includes support for gpsd.
> This includes support for hamlib.
> This does NOT include support for CM108/CM119 PTT.
 
 
Next step - install with:
 
        sudo make install


With this new direwolf executable, you can run

direwolf -c /etc/direwolf.conf

Assuming your direwolf.conf is in /etc -- within that file, setup your gpsd connection and beacons.

Note: direwolf is authored by WB2OSZ -- his repository is at  https://github.com/wb2osz/direwolf including an 'issues' link.

There are two primary ways direwolf is used.  One is simply as a modem, with only modem specific features in direwolf.conf and all other functions created by external programs and/or protocol stacks.  The other is configuring various (mostly APRS) functions within direwolf.conf - either approach is valid, and can be mixed and matched. Basil tends to use the modem only approach.


--


John D. Hays
Edmonds, WA
K7VE

   

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.