Re: DRAWS™ Manager Demo #drawsmanager


Fred Hirsch <Hirschfh@...>
 

John,

I am taking up too much of your time.  My son is a professional programmer I will have him
look into it when he next visits.  Tried the N7nix command git pull, comes back with unable to access GitHub.com,
that seems to be my problem from this machine.  However, John, when I used your sequence of linux command yesterday
I think they worked.


-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Fri, Apr 5, 2019 11:10 am
Subject: Re: [udrc] DRAWS™ Manager Demo #drawsmanager

You need to figure out why you are not resolving the address.  This is a local network administration issue, not a draws-manager specific issue.

Try the ping tests I listed earlier.

You can also try, from a terminal on the Raspberry Pi.

cd /usr/local/var/draws-manager
sudo git pull
sudo systemctl restart draws-manager


Wait about 30 seconds and try connecting from your browser again.




On Fri, Apr 5, 2019 at 9:44 AM Fred Hirsch via Groups.Io <Hirschfh=aol.com@groups.io> wrote:
I used https://draws.local:8080 and received the same error message several second after commanding
Update DRAWS Manager



-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Fri, Apr 5, 2019 10:29 am
Subject: Re: [udrc] DRAWS™ Manager Demo #drawsmanager



On Fri, Apr 5, 2019 at 9:19 AM John D Hays - K7VE via Groups.Io <john=hays.org@groups.io> wrote:

If your LAN network attached computer has zeroconf/bonjour networking, if your DRAWS™ Raspberry Pi computer is named draws, then you can use http://draws.local:8080


--


John D. Hays
Edmonds, WA
K7VE

   

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.