I may have found my problem.  I am running a device that protects my server it is call RECON SENTENEL so I checked it and found

that it had blocked the raspberry pi.  I unblocked it and did an update.  No error message so I assume it worked.  Selected a sample radio type and

tried to save the audio picked.  Rebooted, but the saved did not return.  So 50% fixed.

-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Fri, Apr 5, 2019 11:10 am
Subject: Re: [udrc] DRAWS™ Manager Demo #drawsmanager

You need to figure out why you are not resolving the address.  This is a local network administration issue, not a draws-manager specific issue.

Try the ping tests I listed earlier.

You can also try, from a terminal on the Raspberry Pi.

cd /usr/local/var/draws-manager

sudo git pull

sudo systemctl restart draws-manager


Wait about 30 seconds and try connecting from your browser again.

On Fri, Apr 5, 2019 at 9:44 AM Fred Hirsch via Groups.Io <Hirschfh=aol.com@groups.io> wrote:

I used https://draws.local:8080 and received the same error message several second after commanding

Update DRAWS Manager

-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Fri, Apr 5, 2019 10:29 am
Subject: Re: [udrc] DRAWS™ Manager Demo #drawsmanager

On Fri, Apr 5, 2019 at 9:19 AM John D Hays - K7VE via Groups.Io <john=hays.org@groups.io> wrote:

If your LAN network attached computer has zeroconf/bonjour networking, if your DRAWS™ Raspberry Pi computer is named draws, then you can use http://draws.local:8080

--

---

John D. Hays
Edmonds, WA

K7VE