Re: DRAWS™ and YAESU FTM-100 for analog and digital modes

Basil Gunn

The best thing to do to set transmit levels is to use John's DRAWS
Manager web config.

Also know that script changed at some time as the
initial values used were way too hot.


f6bvp <f6bvp@...> writes:

Hi John,

Here my FTM-100DE is quite new and I just ran setalsa-default that made audio receive and transmit levels adequate.
For the moment I did not try any deviation measurements.

73 de Bernard f6bvp

Le 6 avr. 2019 à 18:22, John Spoonhower <jpspoonhower@...> a écrit :

I am curious about what are the audio level settings for this radio. Can you please post the results of ""?

On Sat, Apr 6, 2019 at 12:15 PM f6bvp <f6bvp@...> wrote:

I just want to report the successful use of
Data Cable, 10-pin mini-DIN to 6-pin mini-DIN, for FTM-400DR/FTM-100DR,
This lets you use DRAWS hat modem and Direwolf for AX.25 packet

FTM-100DE is an interesting mobile VHF/UHF FM rig that I am using at
home for 1200/9600 bauds AX.25 APRS application.
As a transition device it has both "analog" and new digital C4FM modes.
Data plug is a 10 pin mini DIN while UDRC II and DRAWS have mini DIN 6
plugs. This is the reason I had to use a compatible data cable.

Bernard, f6bvp

Join to automatically receive all group messages.