Trying to get WSJT-X working for the next video. Details First, Questions at the end.
Radio: Yaesu FT-891
CAT control works over USB
Radio connected via LEFT Audio port (closest to GPS port)
RIGHT Audio port disabled via DRAWS Manager
I’ve ran `sudo bin/setalsa-ft817.sh`
Audio Input of `sysdefault:CARD=udrc/Mono` works fine and I’m decoding signals
I am unable to find an audio output setting that does anything. Valid choices are:
This radio works fine with a separate signalink and linux PC.
The FT-891 manuals do not specify what the “Peak to Peak Input Voltage” is, so I can not complete the calculations.
It appears that when the software triggers the PTT, that ambient shack noise is being transmitted instead of the audio/data stream from the DRAWS. (I can't whistle FT8 yet, but I'm getting close)
I have not pulled out pin 6 yet, the prev thread with Julian didn’t conclude if that was necessary or not.
What is the Peak to Peak Input Voltage of the FT-891
What is the proper sound output device
Any suggestions for what might be missing or what to try next?