1. udrc@nw-digital-radio.groups.io

Re: Beta12 release announcement

Bjorn Pehrson
 

Hi Basil,

I seem to have exactly te same problem with beta12 and my answers to your questions are

1: no, i only get

pi@draws:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  Subdevices: 7/7
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@draws:~ $

2.

pi@draws:~/bin $ cd
pi@draws:~ $ cd bin
pi@draws:~/bin $ sudo su
root@draws:/home/pi/bin# ./ax25-start
Starting: direwolf.service
Starting: ax25dev.path
Starting: ax25dev.service
Job for ax25dev.service failed because the control process exited with error code.
See "systemctl status ax25dev.service" and "journalctl -xe" for details.
Problem starting ax25dev.service
Starting: ax25-mheardd.service

..hanging, not terminating

On 2019-04-18 19:40, Basil Gunn wrote:
Jack Spitznagel <kd4iz@frawg.org> writes:

Hi Basil.

Thanks for looking at that file. This is exactly what was puzzling me: Did
exactly what you suggested previously, rebooted, and when I tried to make
sure the AX25 stuff was being loaded, it turned out not. At that point (as
root) I tried to "./ax25-start" and it failed during the run with error (I
think I sent you that)
I need to learn what your problem is so please do not do another
install.

I do not have the console output of ax25-start after your reboot &
successful udrc driver enumeration.

1. run aplay -l
- do you see the udrc enumerated?
2.
cd
cd bin
sudo su
./ax25-start
./ax25-status
./ax25-status -d
# Send me the console output.

/Basil

. Since I have previous BETAs running on both boxes,
we know nothing is wrong at the hardware level (except maybe my "organic
CPU"). Lets let my past reports "go away" and proceed with the following:
Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.