Re: Beta12 release announcement
Here you go. It appears that commenting out the audio fixed the problem.
Fresh burn of Beta 12Seems like progress is on the horizon
On 4/18/2019 1:19 PM, Basil Gunn wrote:
I am trying to understand why the Draws udrc driver is not loading. Could you please get the hwtest.sh script and show me the results. Specifically: cd cd n7nix git pull cd bin ./hwtest.sh # Then edit /boot/config.txt & comment this line # change dtparam=audio=on # to #dtparam=audio=on Now reboot & run n7nix/bin/hwtest.sh Thanks, /Basil Bjorn Pehrson <bjorn@...> writes:Hi Basil, I seem to have exactly te same problem with beta12 and my answers to your questions are 1: no, i only get pi@draws:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 pi@draws:~ $ 2. pi@draws:~/bin $ cd pi@draws:~ $ cd bin pi@draws:~/bin $ sudo su root@draws:/home/pi/bin# ./ax25-start Starting: direwolf.service Starting: ax25dev.path Starting: ax25dev.service Job for ax25dev.service failed because the control process exited with error code. See "systemctl status ax25dev.service" and "journalctl -xe" for details. Problem starting ax25dev.service Starting: ax25-mheardd.service ..hanging, not terminating On 2019-04-18 19:40, Basil Gunn wrote:Jack Spitznagel <kd4iz@...> writes:Hi Basil. Thanks for looking at that file. This is exactly what was puzzling me: Did exactly what you suggested previously, rebooted, and when I tried to make sure the AX25 stuff was being loaded, it turned out not. At that point (as root) I tried to "./ax25-start" and it failed during the run with error (I think I sent you that)I need to learn what your problem is so please do not do another install. I do not have the console output of ax25-start after your reboot & successful udrc driver enumeration. 1. run aplay -l - do you see the udrc enumerated? 2. cd cd bin sudo su ./ax25-start ./ax25-status ./ax25-status -d # Send me the console output. /Basil. Since I have previous BETAs running on both boxes, we know nothing is wrong at the hardware level (except maybe my "organic CPU"). Lets let my past reports "go away" and proceed with the following: