Re: Ft 817, wsjt #ft817 #cat #wsjt

Richard Waller <rewaller@...>

Thanks John, that’s helpful. I have a rigblaster plug and play which I’ve used with my ft 817 on a  Windows computer. This question may go beyond support for the draws hat but I’m wondering if I could use the rig blaster for radio control in place of ct - 62  and route the audio in out through the din plug? I read on line that the rigblaster plug and play works with Linux. Thanks again. Rick. Ka4ohm 

On Apr 24, 2019, at 6:33 PM, Richard Waller via Groups.Io <rewaller@...> wrote:

John, since the Hf digital frequencies are more or less channelized I really don’t need rig control. What commands do I need to get fldigi to operate GPIO ptt through the mini din plug? If I were to use the CT-62 what drivers are needed for the R pi? Thanks. Rick. Ka4ohm 

On Apr 23, 2019, at 9:47 PM, John D Hays - K7VE <john@...> wrote:

Yes, the accessory port is used for CAT control.  Typically, you use a CT-62 type cable for CAT -- there are USB versions which work for the Raspberry Pi and FT-8x7 radios. For example

A couple of programs like fldigi and direwolf support GPIO PTT on the Raspberry Pi (which is wired to the DIN6 PTT line), others do not, so CAT, VOX, or other methods need to be used to key the transmitter.

This is true for applications running on the Pi ... it makes for a good investment for your FT-817

On Tue, Apr 23, 2019 at 6:37 PM Richard Waller via Groups.Io <> wrote:
Thanks John. Are you saying I need to use a USB port on the Rpi for rig control? I’m using the data port on the 817 to connect to draws hat micro din. Would I use the accessory jack for rig control? 

John D. Hays
Edmonds, WA


Join to automatically receive all group messages.