Re: [New post] Sample Cases Have Arrived for DRAWS™ Workstation


Ryan W Leathers
 

See the Feb 4 announcement. It states that the early adopter boards will need a modification for this connector to work with the case. It also says an app note will be provided which I take to mean this modification is to be performed by the end user.


On Mon, May 27, 2019, 10:51 PM Douglas KI7LIK <KI7LIK.AZ@...> wrote:
I noticed in the picture of the case that the two pin connector on the board faces up, mine faces to the side.  Would I need to modify the connector or is there a "fix" for this?

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.