Re: Using the DRAWS hat with a Raspberry Pi 4 #draws #yaac #install #js8call #replacecompass
Frank, I did the install on 3B+, so I needed unpack and setup a Pi 4 (4GB) to verify it ran there as well. I just moved over the SD Card to test. Installation (using the 3B+) git clone https://github.com/nwdigitalradio/n7nix.git cd n7nix/config sudo ./image_install.sh sudo apt install --fix-broken sudo apt update sudo apt upgrade After moving the SD Card to the Pi 4 pi@draws-buster:~ $ uname -m armv7l pi@draws-buster:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Telemetry from DRAWS™ Manager (Footer)
On Tue, Aug 27, 2019 at 7:00 PM Frank Ivan via Groups.Io <k0fei=me.com@groups.io> wrote: Hi John, --
John D. Hays Kingston, WA K7VE
|
|