I am not sure if this is still the case as the latest Buster
image may include the updated kernel. When I did this on an R-Pi
3B+, I needed to run rpi-update to get the latest kernel and once
that was done and the changes made to /boot/config.txt everything
worked fine.
Hi Joh
Decided to try again with new SD card and all.
1. Downloaded Buster 2019-07-10-raspbian-buster.img
2.Got new SanDisk Extreme 64 gig SD out of package.
3. Used Etcher to flash image.
4. Booted SD in Raspberry Pi 3B+ with original DRAWS hat installed
- running from power through micro-USB port.
5. Boot resized file system and entered United States - and Denver
then set password and then selected WiFi.
6. Rebooted.
7. Did sudo apt update - then sudo apt dist-upgrade.
8. Rebooted.
9. sudo apt install git build-essential vim and nmap - git and
build-essential were up to date installed vim and nmap
10. git clone https://github.com/nwdigitalradio/n7nix.git
11. cd n7nix/config
12. sudo ./image_install.sh
13. sudo apt --fix-broken install
14 reboot
15. sudo apt update - sudo apt upgrade - nothing installed
16. cd n7nix/bin
17. ./sndcard.sh - No UDRC sound card found.
18 enable ssh to be able to cut and paste commands.
19 aplay -l
**** List
of PLAYBACK Hardware Devices ****
card 0:
ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0:
ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835
IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0:
ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835
IEC958/HDMI1]
Subdevices: 1/1
Subdevice #0: subdevice #0
20../showudrc.sh
chk1:
snd-soc-tlv320aic32x4-i2c.ko exists, Driver CONFLICT
chk2:
snd-soc-tlv320aic32x4.ko exists, Driver CONFLICT
====
Sound Card ====
No udrc
sound card found.
==== Pi
Ver ====
Pi 3
Model B+ Mfg by Sony UK
Has WiFi
==== udrc
Ver ====
Found a
DRAWS
HAT
ID EEPROM
Name:
hat
Product:
Digital Radio Amateur Work Station
Product
ID: 0x0004
Product
ver: 0x0204
UUID:
2420cda1-931d-478c-80e5-d770f3346adb
Vendor:
NW Digital Radio
==== sys
Ver ====
-----
image version
2019 08
28 11:40:22 MDT: image_install.sh: image install script START
-----
/proc/version
Linux
version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3
(crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu
Aug 15 11:49:46 BST 2019
-----
/etc/*version: 10.0
-----
/etc/*release
PRETTY_NAME="Raspbian
GNU/Linux 10 (buster)"
NAME="Raspbian
GNU/Linux"
VERSION_ID="10"
VERSION="10
(buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
-----
lsb_release
No LSB
modules are available.
Distributor
ID: Raspbian
Description: Raspbian
GNU/Linux 10 (buster)
Release: 10
Codename: buster
----
systemd
Static
hostname: raspberrypi
Icon name: computer
Machine ID: 4b4422b92c324d0abed84ad9f45dc301
Boot ID: 58ad2de1744940d9bf6d256c87ee90be
Operating System: Raspbian GNU/Linux 10 (buster)
Kernel: Linux 4.19.66-v7+
Architecture: arm
----
modules
Command
'apt-get install udrc-dkms' failed or was not run.
----
kernel
dpkg-query:
no packages found matching udrc-dkms
|/
Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name
Version Architecture Description
+++-==================-============-============-=================================
ii
raspberrypi-kernel 1.20190819-1 armhf Raspberry Pi
bootloader
Directory:
/proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 does NOT
exist
Directory:
/proc/device-tree/soc/i2c@7e804000 exists and status is
disabled
----
syslog
----
dmesg
----
compass
Compass
preference file not found: /etc/apt/preferences.d/compass
Compass
apt sources list file not found:
/etc/apt/sources.list.d/compass.list
----
compass package files
ls:
cannot access '/var/lib/apt/lists/archive.compasslinux.org_*':
No such file or directory
-----
Dire Wolf DEVELOPMENT version 1.6 C (Aug 28 2019)
====
Filesystem ====
/dev/root
59G 3.5G 53G 7% /
==== boot
config ====
# Enable
audio (loads snd_bcm2835)
dtparam=audio=on
[pi4]
# Enable
DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
[all]
#dtoverlay=vc4-fkms-v3d
# enable
udrc/draws if no eeprom
dtoverlay=draws,alsaname=udrc
force_turbo=1
---- gpsd
/usr/local/sbin/gpsd
gpsd:
3.19 (revision 3.19)
●
gpsd.service - GPS (Global Positioning System) Daemon
Loaded: loaded (/lib/systemd/system/gpsd.service; enabled;
vendor preset: enabled)
Active: active (running) since
Wed 2019-08-28 12:09:50 MDT; 8min ago
Main
PID: 487 (gpsd)
Tasks: 1 (limit: 2200)
Memory: 828.0K
CGroup: /system.slice/gpsd.service
└─487 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0
Aug 28
12:09:50 raspberrypi systemd[1]: Starting GPS (Global
Positioning System) Daemon...
Aug 28
12:09:50 raspberrypi systemd[1]: Started GPS (Global
Positioning System) Daemon.
Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR:
SER: device open of /dev/ttySC0 failed: No such file or
directory - retrying read-only
Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR:
SER: read-only device open of /dev/ttySC0 failed: No such
file or directory
Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR:
initial GPS device /dev/ttySC0 open failed
Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR:
SER: device open of /dev/pps0 failed: No such file or
directory - retrying read-only
Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR:
SER: read-only device open of /dev/pps0 failed: No such file
or directory
Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR:
initial GPS device /dev/pps0 open failed
----
chrony
ls:
cannot access '/dev/pps*': No such file or directory
ls:
cannot access '/dev/ttySC*': No such file or directory
-- chrony
sources
210
Number of sources = 6
MS
Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
#? GPS
0 3 0 - +0ns[ +0ns]
+/- 0ns
#? PPS
0 3 0 - +0ns[ +0ns]
+/- 0ns
^*
time.nullroutenetworks.c> 2 6 377 25
-2585us[-2695us] +/- 26ms
^+
216.126.233.109 2 6 377 85
-2683us[-2784us] +/- 33ms
^+
vf2.bbnx.net 2 6 377 88
+4271us[+4170us] +/- 62ms
^-
h184-60-28-49.mdtnwi.dsl> 2 6 377 89
+4790us[+4690us] +/- 68ms
-- chrony
tracking
Reference
ID : 1783A007 (time.nullroutenetworks.com)
Stratum
: 3
Ref time
(UTC) : Wed Aug 28 18:18:05 2019
System
time : 0.000431385 seconds fast of NTP time
Last
offset : -0.000109855 seconds
RMS
offset : 0.002575286 seconds
Frequency
: 5.132 ppm fast
Residual
freq : -0.043 ppm
Skew
: 3.747 ppm
Root
delay : 0.029145319 seconds
Root
dispersion : 0.007230671 seconds
Update
interval : 64.2 seconds
Leap
status : Normal
-- chrony
sourcestats
210
Number of sources = 6
Name/IP
Address NP NR Span Frequency Freq Skew Offset
Std Dev
==============================================================================
GPS
0 0 0 +0.000 2000.000 +0ns
4000ms
PPS
0 0 0 +0.000 2000.000 +0ns
4000ms
time.nullroutenetworks.c>
11 8 457 -0.555 4.369 -538us 457us
216.126.233.109
10 8 395 +0.003 7.370 -2334us 657us
vf2.bbnx.net
10 5 394 +3.868 12.961 +5571us
1182us
h184-60-28-49.mdtnwi.dsl>
10 5 393 -4.706 23.535 +4642us 1796us
----
sensors
-rw-r--r--
1 root root 171 Aug 28 11:50 /etc/sensors.d/draws
rpi_volt-isa-0000
Adapter:
ISA adapter
in0:
N/A
----
throttle
throttled=0x0
----
locale
Locale
country codes consistent among WiFi cfg file, iw reg &
X11: US
core_config.sh
has been run 0 time(s)
Thats a blow by blow.
Thanks
Frank - K0FEI