Re: Buster Image with DRAWS software

Frank Ivan
 

Hi Edd,

That is useful information.  I'll look at it as well this evening after work.  As long as the interface to the hardware is working then it may be gpsd is getting confused with the time change.  I pretty much operate my ham related computers on UTC, but of course you should be able to use any timezone you like.

There are some commands you can send to see what is going on if you like
sudo systemctl status gpsd will show any errors that happened when the process started and if it is running.

You might also want to look at https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS™%3A-Setup-GPSD-for-Time-and--Position NW Digital's documentation.

73 - Frank - K0FEI

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.