Re: Just starting out #draws


Ryan Matthew Headley
 

This is the image you should use if you need and X server:

https://downloads.raspberrypi.org/raspbian_latest

If you can get by without a desktop, this install is a little over half the size of the above version with the X server.

https://downloads.raspberrypi.org/raspbian_lite_latest

Either way, make sure that you make the changes to /boot/config.txt to enable to DRAWS hat.

When you go to configure your specific software packages, the DRAWS board shows up as the ALSA device 'UDRC.'

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.