David, you are right!
100ohm Resistors we’re incorrectly Stuffed as 100k creating a 20dB attenuator.
I should have caught it when we had the cap problem.
With the new run, 8 Components were stuffed incorrectly:
C17, C20 (0603) should be 0.1uF but 10uF was stuffed
Easiest Fix is to Remove
R20, R21, R26, R27, R39, R40 (0603) 100ohms but 100kohms was stuffed
Easiest Fix is to solder 100ohms on top (in parallel)
Assembly has current stock in for re-work.
We’ll make it right for boards in the field, whatever it takes.
I’m out of the office until January 6th.
Thanks for your patience,