Re: measure_deviate.sh not working on RPi4b


Basil Gunn
 

Here are the steps that fix measure_deviate.sh but break btest.sh. I
went through a couple of cycles of turning ax25 on and off between
running the two scripts just to make sure.
Below is your btest.sh output which looks good. Can you be more specific
about what is broken? Are you not seeing your radio transmit? Also be
aware that when the AX.25 stack is first brought up the first 2 packets
transmitted are control packets and may not engage PTT. On start up
please run btest.sh at least 3 times before checking if your radio is
transmitting.

./btest.sh
*** Running as user: pi ***
Send a message beacon
Sent: /usr/local/sbin/beacon -c KE7RGP-11 -d 'APUDR1 via WIDE1-1' -l -s udr0 :KE7RGP :01 13:20:48 PST KE7RGP mesg_beacon test from host husky on port udr0 Seq: 0

Also I see your packets on aprs.fi and they look OK
https://aprs.fi/?c=raw&call=KE7RGP*&limit=50&view=normal

2020-01-01 13:26:46 PST: KE7RGP-11>APUDR1,WIDE1-1,qAR,KI7NLL::KE7RGP :01 13:26:44 PST KE7RGP mesg_beacon test from host husky on port udr0 Seq: 0%

/Basil n7nix

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.