#direwolf #direwolf

Paul Noa

Ok folks,

I have installed Direwolf with a DRAWS hat using the basic Raspbian image with desktop only.

1) My APRS info is getting through IGate but is unverified and is not present APRS.fi raw data, presumably because its not verified.
2) the fixed info I entered in Direwolf.conf shows up but not the actual GPSD position ??
3) I get the following message on startup specifically the Warning I am not sure what to do about:

pi@raspberrypi:~ $ direwolf
Dire Wolf version 1.5
Includes optional support for:  gpsd cm108-ptt
Reading config file direwolf.conf
WARNING: strlcpy result length 11 exceeds maximum length 7.  (config.c config_init 4025)
Audio device for both receive and transmit: plughw:CARD=udrc,DEV=0  (channels 0 & 1)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, E+, 48000 sample rate / 3.
Channel 1: 1200 baud, AFSK 1200 & 2200 Hz, E+, 48000 sample rate / 3.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
GPSD: Location fix is now 3D.
Now connected to IGate server noam.aprs2.net (
Check server status here
[ig] # aprsc 2.1.5-g8af3cdc
[ig] # logresp KO4BCZ unverified, server T2SJC
[ig] KO4BCZ>APDW15:!3009.37NR08134.58W&
[0L] KO4BCZ>APDW15,WIDE1-1,WIDE2-1:!3009.37NS08134.58W#PHG6160UDRC
Any Comments that would help would be much appreciated.


Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.