UDRCII with RT Systems Cable for CAT Control & mini 6DIN and Yaesu FT-450D --PTT engaged but 0 Watts transmitted #ft-8 #wsjt-x

TG9AOR
 

Hello Friends. I have this setup on  WSJT-X that came with the DRAWS Image (WSJT-X v2.0.1 7ddcb7)
Radio Tab                                                                         Audio Tab
Rig: FT-450                                                                       Input plughw:CARD=udrc,DEV=0 Mono
Serial Port /dev/ttyUSB0                                                    Output plughw:CARD=udrc,DEV=0 Mono
Baud Rate 38400
Data Bits Default
Stop Bits Default
HandShake Default
Force Control Lines DTR Blank
Force Control Lines RTS Blank
PTT Method CAT
Mode DATA/PKT
Split Operation None

I am able to decode. Curiously, with this same cable, on the FT817(I am referring to the UDRC cable) I cannot hear the static, maybe because of the squelch pin John told me back in 2018, must behave differently on the 817/857.

So with this setup the PTT activates, but 0 watts are transmitted.
Thanks for reading my message and God Bless everyone. 73 de TG9AOR

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.