Looking at my notes to see what might be relevant because I do not own
an FT-450.

* Re: FT-817, I could only get this radio to work by disconnecting pin 6
(squelch) on the mDin6 cable.
https://github.com/nwdigitalradio/n7nix/blob/master/docs/RADIO_APP_NOTES.md

* From your config you are using the left DRAWS connector.
* Adjust the power output slider on the right side of the wsjt-x screen?
* Verify using draws manager
* Input from Receiver: AF (pin5) for your left channel.
* Verify the setting in the Radio that tells it to use the Data
connector for transmit audio, instead of from the Microphone.
* You want MODE = DAT(a) instead of MODE = SSB.
* The serial settings are for configuring rig control which most likely
has no effect on the DRAWS hat configuration.
Make sure rig control is affecting the left channel.
* Look at pertinent ALSA settings alsa-show.sh
* Check out Steve McGrane's video #5 DRAWS GPS & FT8
https://www.youtube.com/watch?v=5lxvVD1-0lk&;feature=youtu.be
* In the groups.io forum for this group use the search option for wsjt
/Basil n7nix


TG9AOR <qrz@tg9aor.net> writes: