Basil Gunn

A brief look at the ICOM F521 manual indicates that it does NOT have
discriminator output so do NOT route IN1 ALSA control ie. your left
channel is currently configured to use discriminator out & it shouldn't be.
This assumes that you have a properly wired cable with discriminator out
on pin 4 & AFOUT on pin 5 referencing the mDin6 cable.

Paul Noa <pauljnoa@...> writes:

~/n7nix/debug $ ./ -d
Debug mode on
===== ALSA Controls for Radio Transmit =====
LO Driver Gain L:[-6.00dB] R:[-6.00dB]
PCM L:[-6.00dB] R:[-25.00dB]
DAC Playback PT L:[P3] R:[P3]
LO Playback CM [Full Chip]

===== ALSA Controls for Radio Receive =====
ADC Level L:[-6.00dB] R:[2.00dB]
IN1 L:[10 kOhm] R:[Off]
IN2 L:[Off] R:[10 kOhm]
CM L:[10 kOhm] R:[10 kOhm]

Join to automatically receive all group messages.