Re: #DRAWS oddity, GPS and ALSA headaches #draws


Basil Gunn
 

Hi Jack,
If I could give out prizes for most interesting symptoms you would
definitely get a prize.

First Pass at your console output.
Drivers are loading fine, no software faults, hardware is definitely
stressed, gps not working, codec not working

Second Pass at your console output.
Your RPI is running at over 150F and will soon catch fire if you don't
DISCONNECT THE POWER. From vcgencmd throttled=0xd0005

- Temperature limit has occurred
- Throttling has occurred
- Under voltage has occurred
The RPi is currently running throttled & under-voltage

Just recently I have seen someone else's RPi start running really hot.
Also check your 5V RPi wall wart. Is it warm/hot?

/Basil n7nix

See embedded below.

Jack Spitznagel <@flyingfrawg> writes:

Hi Basil,

Just when I thought everything was pretty stable, I started to get protests
from xastir that my GPS wasn't behaving.
... snip...
---- sensors
-rw-r--r-- 1 root root 171 Sep 19 2019 /etc/sensors.d/draws
rpi_volt-isa-0000
Adapter: ISA adapter
in0: N/A ALARM (LCRIT)

ads1015-i2c-1-48
Adapter: bcm2835 I2C adapter
+12V: +0.00 V
in5: +0.53 V
User ADC 1: +0.01 V
User ADC 2: +0.00 V


---- throttle
temp=69.3'C
throttled=0xd0005

SO:
Should I wait for image 16, try another install then?
Nope.

Do you see something that got flipped the wrong way by me when running
./app_config.sh core?
Software config looks OK.

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.