Re: ax25 transmitting but output is incorrect apparently so no connection


Basil Gunn
 

Mike B <kf5dey@...> writes:

BTW as I always I appreciate the info available...sometimes it is just out of my league...
No problem, stick with it, it will become 2nd nature after a while.

As far as APRS, thanks, I search on aprs.fi and it says doesn't exist
in database. I still can't see that particular one on aprs.fi...I
guess you can't just go to the website and type in a callsign like for
everyone else. So I will have to take your word on that...and that
narrows down the trouble a bit.
Go to aprs.fi
click on raw packets
set Originating callsign to KF5DEY*
which says look for KF5DEY all SSIDs

I don't see any of your position beacons and gps is NOT getting a fix.

Left connector from DRAWS to FT-857D
I'll send more info tomorrow.

---

---
pi@draws:~/n7nix/debug $ wl2kax25 -c w0uo-10
connect(): Connection timed out

pi@draws:~ $ sudo listen -a
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:28.637932
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:31.703698
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:34.743701
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:37.783687
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:40.823686
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:43.863681
udr0: fm KF5DEY to W0UO-10 ctl SABM+ 21:28:46.903694
---

pi@draws:~/n7nix/bin $ ./alsa-show.sh
===== ALSA Controls for Radio Transmit =====
LO Driver Gain L:[-6.00dB] R:[-6.00dB]
PCM L:[-33.00dB] R:[-25.00dB]
DAC Playback PT L:[P3] R:[P3]
LO Playback CM [Full Chip]

===== ALSA Controls for Radio Receive =====
ADC Level L:[-2.00dB] R:[0.00dB]
IN1 L:[Off] R:[Off]
IN2 L:[10 kOhm] R:[Off]
CM L:[10 kOhm] R:[10 kOhm]

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.