Re: No Sound Cards with UDRC and aplay -l


Bernard f6bvp / ai7bg
 

Hi Bob,
I recently ran Hampi and experienced the same kind of issue.
DRAWS board was not found while it was ok with the same hardware Rpi + DRAWS when running nwdr16 Linux image.
After exchanging /boot/config.txt file with the one from nwdr distro, then DRAWS was found on Hampi distro.
After a lot of trials and with Basil n7nix help, we found that in file config.txt the two following lines just before the line with [pi4] should be removed :

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

The important thing is that instruction line :
dtoverlay=

should never occur after a line with
dtparam=audio=on
which is already present in [all] paragraph.

Bernard, f6bvp / ai7bg

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.