Re: Update for ADC Config File #sensors #adc


Daniel VE3NI
 

Hi Bryan,

 

I updated /etc/sensors.d/draws as indicated and I am now seeing that the +5V sensor is reading +1.17V.

 

I have the early adopter card.

 

Any idea why the voltage might be reading low?

 

Thanks,

Daniel VE3NI

 

 

pi@draws:~ $ cat /etc/sensors.d/draws

#DRAWS uses the TL024 Which is SW Compatible with the ADS1015

#It's an 8 Channel ADC, but only 4 Channels are pinned out

 

chip "ads1015-*"

        label in4 "+12V"

        label in5 "+5V"

        label in6 "User ADC 1"

        label in7 "User ADC 2"

        compute in4 ((48.7/10)+1)*@, @/((48.7/10)+1)

        compute in5 ((10/10)+1)*@, @/((10/10)+1)

 

pi@draws:~ $ sensors

rpi_volt-isa-0000

Adapter: ISA adapter

in0:              N/A

 

ads1015-i2c-1-48

Adapter: bcm2835 I2C adapter

+12V:        +12.33 V

+5V:          +1.17 V

User ADC 1:   +0.00 V

User ADC 2:   +0.00 V

 

pi@draws:~ $

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.