Re: Quick Q on interface cables...


 

No, you do not connect the 2 OUTPUTS from the Radio Together. Each one goes to a Separate INPUT on the DRAWS.

ICOM Radios with the Mini DIN-6 Data Connector use the supplied 6 Wire Straight Thru Cables

On Aug 4, 2020, at 12:32 PM, Basil Gunn <@basil860> wrote:


All right - it sounds like I can just solder both wires onto the same pin on the mic connector then, correct?
Be more specific which "both wires"?

Also which ICOM dual band radio?

Rather than making assumptions look for the radio connector in its
manual.


Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.