Mark J Culross <firstname.lastname@example.org> writes:
Basil (n7nix):Have fun in your training class.
As a side note, I have used my IC-7000 successfully for PSK31 (aI was trying to qualify your cable and I don't think that is where the
problem lies. After verifying that my IC-706 can hear packets with a
default setup (without touching ALSA settings) I believe it's down to
either the IC-7000 config or a DRAWS hardware problem.
Not wanting to be the victim of any ASSumptions, I did try my secondYep, confirmed, not a cable issue.
Unfortunately, the IC-7000 is my only VHF/UHF radio withDo you have an HT? Would be useful to listen for output during transmit
On the TX side, I noted in an earlier message that I initiated a testYes, independent. With transmit need to verify PTT works and set up of
I'll forward the result of running "showudrc.sh" when I get back to itOK, I'm not going anywhere.
One question: in your description, you mention using nwdr17. I've beencurrent_image.img.xz and nwdr17.img.xz are the same file symbolically
lrwxrwxrwx 1 www-data www-data 13 Aug 22 11:07 current_image.img.xz -> nwdr17.img.xz
-rw-r--r-- 1 www-data www-data 1974364348 Aug 22 11:02 nwdr17.img.xz
Thanks again for your assistance !!Thanks for hanging in there !!
Mark J CulrossKD5RXT