Re: OpenRepeater running witH DRAWS hat #udrc


Basil Gunn
 

Assuming you are usin SVXLink
In file /etc/svxlink/svxlink.conf

In section [RX1]
[Rx1]
TYPE=Local
AUDIO_DEV=alsa:plughw:CARD=udrc,DEV=0

In section [TX1]
[Tx1]
TYPE=Local
AUDIO_DEV=alsa:plughw:CARD=udrc,DEV=0


km4cj@comcast.net writes:

Has any one been successful with getting OpenRepeater to run with the DRAWS hat. The radio control interfaces are fine, PTT and COS via the I/O mapping. The issue is getting OpenRepeater to see the UDRC sound device. I downloaded the latest OpenRepeater image and ran it on the board. I added

dtoverlay=

dtoverlay=draws,alsaname=udrc

force_turbo=1

to the boot/config.txt file.
The Linux Kernal of the Open Repeater build is 4.19.66-v7+

Any suggestions from the group. Thanks in advance
Steve

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.