Re: HDMI issue with Draws


W8GMC
 

Hi Basil, 

Yes, you summarized the issue correctly. Here is the output as requested. 

Config.txt...
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# Always force HDMI output and enable HDMI sound
hdmi_force_hotplug=1
hdmi_drive=2
 
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=2
 
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
disable_overscan=1
 
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
 
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
 
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
 
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
 
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
hdmi_drive=2
 
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
config_hdmi_boost=4
 
# uncomment for composite PAL
#sdtv_mode=2
 
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
 
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
 
# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18
 
# Additional overlays and parameters are documented /boot/overlays/README
 
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
 
[all]
#dtoverlay=vc4-fkms-v3d
 
# Flush all overlays, ie. deprecated overlays loaded from eeprom
dtoverlay=
# enable udrc/draws if no eeprom
dtoverlay=draws,alsaname=udrc
force_turbo=1
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
#hdmi_group=2
#hdmi_mode=85
#hdmi_safe=1
#Always force HDMI output and enable HDMI sound
hdmi_force_hotplug=1
hdmi_drive=2


Here is the output from head -n1 /var/log/udr_install.log....
2020 12 04 13:45:55 PST: SD image version: nwdr18
 
and udr_install.log....

2019 09 19 14:30:00 PDT: install.sh: draws-manager install script FINISHED
2019 09 19 15:00:47 PDT: xs_install.sh: Xastir install script FINISHED
2020 01 06 12:54:56 PST: gp_install.sh: gps install script FINISHED
2020 01 06 12:54:57 PST: gp_verchk.sh: gpsd program update script FINISHED
2020 01 06 13:16:35 PST: hf_install.sh: HF program (js8call) install script FINISHED
2020 01 06 13:16:53 PST: hf_install.sh: HF program (wsjtx) install script FINISHED
2020 01 06 13:18:19 PST: hf_install.sh: HF program (fllog) install script FINISHED
2020 01 06 13:18:20 PST: hf_verchk.sh: hf program update script FINISHED
2020 01 06 13:34:28 PST: xs_install.sh: Xastir install script FINISHED
2020 01 08 13:08:49 PST: install.sh: YAAC install script FINISHED
2020 01 19 08:40:32 PST: hf_install.sh: HF program (fldigi) install script FINISHED
2020 01 19 08:49:52 PST: hf_install.sh: HF program (flrig) install script FINISHED
2020 01 19 08:49:54 PST: hf_verchk.sh: hf program update script FINISHED
2020 01 19 11:32:37 PST: install.sh: fbb BBS install script FINISHED
2020 05 11 09:31:46 PDT: xs_install.sh: Xastir install script FINISHED
2020 05 11 09:31:46 PDT: xs_verchk.sh: Xastir program update script FINISHED
2020 05 11 09:45:03 PDT: hf_install.sh: HF program (fldigi) install script FINISHED
2020 05 11 09:49:23 PDT: hf_install.sh: HF program (flrig) install script FINISHED
2020 05 11 09:49:23 PDT: hf_verchk.sh: hf program update script FINISHED
2020 05 11 10:07:24 PDT: dw_update.sh: direwolf update script FINISHED
2020 06 08 10:18:55 PDT: hf_install.sh: HF program (wsjtx) install script FINISHED
2020 06 08 10:28:58 PDT: hf_install.sh: HF program (fldigi) install script FINISHED
2020 06 08 10:31:41 PDT: hf_install.sh: HF program (flmsg) install script FINISHED
2020 06 08 10:31:42 PDT: hf_verchk.sh: hf program update script FINISHED
2020 07 17 13:59:05 PDT: hf_install.sh: HF program (js8call) install script FINISHED
2020 07 17 13:59:16 PDT: hf_install.sh: HF program (wsjtx) install script FINISHED
2020 07 17 14:09:09 PDT: hf_install.sh: HF program (fldigi) install script FINISHED
2020 07 17 14:13:43 PDT: hf_install.sh: HF program (flrig) install script FINISHED
2020 07 17 14:16:38 PDT: hf_install.sh: HF program (flmsg) install script FINISHED
2020 07 17 14:16:49 PDT: hf_verchk.sh: hf program update script FINISHED
2020 07 17 21:50:22 PDT: dw_update.sh: direwolf update script FINISHED
2020 08 21 09:20:21 PDT: gp_install.sh: gps install script FINISHED
2020 08 21 09:20:22 PDT: gp_verchk.sh: gpsd program update script FINISHED
2020 09 18 09:48:43 PDT: hf_install.sh: HF program (flmsg) install script FINISHED
2020 09 18 09:48:43 PDT: hf_verchk.sh: hf program update script FINISHED
2020 11 04 12:21:02 PST: bbs_install.sh: fbb BBS install script FINISHED
2020 11 04 12:33:46 PST: hf_install.sh: HF program (fldigi) install script FINISHED
2020 11 04 12:38:37 PST: hf_install.sh: HF program (flrig) install script FINISHED
2020 11 04 12:38:37 PST: hf_verchk.sh: hf program update script FINISHED
2020 11 04 12:43:39 PST: dw_update.sh: direwolf update script FINISHED
2020 11 10 08:46:46 PST: install.sh: RMS Gateway updated
2020 11 27 10:11:24 PST: hf_install.sh: HF program (fldigi) install script FINISHED
2020 11 27 10:11:26 PST: hf_verchk.sh: hf program update script FINISHED
2020 12 04 13:32:10 PST: hf_install.sh: HF program (fldigi) install script FINISHED
2020 12 04 13:36:36 PST: hf_install.sh: HF program (flrig) install script FINISHED
2020 12 04 13:36:37 PST: hf_verchk.sh: hf program update script FINISHED
2021 01 16 13:08:45 EST: app_config.sh: core config script FINISHED
2021 01 16 13:08:56 EST: app_config.sh: AX.25 config script FINISHED
2021 01 16 13:08:56 EST: app_config.sh: direwolf config script FINISHED
2021 01 16 13:08:57 EST: install.sh: systemd install script FINISHED
2021 01 16 13:08:58 EST: config.sh: systemd config script FINISHED
2021 01 16 13:08:59 EST: iptable_install.sh: iptables installed but NOT configured, no AX.25 devices available
2021 01 16 13:11:04 EST: app_config.sh: app config (core) script FINISHED
2021 01 16 13:18:43 EST: app_config.sh: RMS Gateway config script FINISHED
2021 01 16 13:18:43 EST: app_config.sh: app config (rmsgw) script FINISHED
2021 01 16 13:19:16 EST: app_config.sh: paclink-unix basic config FINISHED
2021 01 16 13:19:20 EST: app_config.sh: postfix config script FINISHED
2021 01 16 13:19:29 EST: app_config.sh: mutt config script FINISHED
2021 01 16 13:21:08 EST: pluweb_install.sh: script FINISHED
2021 01 16 13:23:08 EST: app_config.sh: dovecot config FINISHED
2021 01 16 13:25:46 EST: app_config.sh: rainloop install script FINISHED
2021 01 16 13:26:29 EST: app_config.sh: app config (plu) script FINISHED

Thank you,
Mike

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.