Re: Audio setup problem with Raspberry PI and DRAWS hat. #audio #ft-817 #wsjt-x #drawsmanager #draws-manager


Basil Gunn
 

Below is what you will get if you do NOT use the NWDR image and follow
the 'Getting Started' guide.

pi@hampi:~ $ udrcver.sh
bash: udrcver.sh: command not found
pi@hampi:~ $ showudrc.sh
bash: showudrc.sh: command not found

This is what I asked you to do:

USING THE NWDR IMAGE post the console output from the following
commands:
aplay -l
udrcver.sh
showudrc.sh

wsjt-x & fldigi are both installed on the NWDR image. Get that working
first.

If you have problems with DRAWS or are a Linux noob you must use the
NWDR image if you want my support.

jakob@scherer.com writes:

Basil, here is what I got:
pi@hampi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1]
Subdevices: 4/4
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones]
Subdevices: 4/4
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
card 2: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 [bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
pi@hampi:~ $ udrcver.sh
bash: udrcver.sh: command not found
pi@hampi:~ $ showudrc.sh
bash: showudrc.sh: command not found
pi@hampi:~ $
73 Jakob

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.