Re: Audio setup problem with Raspberry PI and DRAWS hat. #audio #ft-817 #wsjt-x #drawsmanager #draws-manager

Basil Gunn

Now the NWDR image is up and running.

I followed the WIKI instructions up to the fldigi installation and
setup. When I arrived at the output gain adjustment with the fldigi
Tune function, I could not generate any transmit signal on the FT-818,
even with maximum PCM value.
The ALSA control values are incorrect. If you run the following script
in a console that should get you close.

Is your radio a Yaesu FT-817 or an FT818? You mention both.

Thanks for helping me. 73 de Jakob

==== ALSA Controls for Radio Transmit ====
LO Driver Gain L:[-6.00dB] R:[-6.00dB]
PCM L:[-63.50dB] R:[-63.50dB]
DAC Playback PT L:[P3] R:[P3]
LO Playback CM [Full Chip]
==== ALSA Controls for Radio Receive ====
ADC Level L:[0.00dB] R:[0.00dB]
IN1 L:[Off] R:[Off]
IN2 L:[Off] R:[Off]

Join to automatically receive all group messages.