Re: GPS very slow to pick up sats #gps


Kk6qms
 

On Sun, Mar 28, 2021 at 09:59 PM, Basil Gunn wrote:
systemctl status gpsd
1- I am using the aluminum DRAWS early adopter case. No issue there.

2- gpsd is good- almost 4hrs- no fix (I stopped/restarted it in the idea I was closing/reopening to troubleshoot not from any inherent wisdom haha):
"root@DRAWSpi:/home/pi# systemctl status gpsd
● gpsd.service - GPS (Global Positioning System) Daemon
   Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: ena
   Active: active (running) since Sun 2021-03-28 18:20:40 PDT; 3h 41min ago
  Process: 603 ExecStart=/usr/sbin/gpsd $GPSD_OPTIONS $DEVICES (code=exited, sta
 Main PID: 608 (gpsd)
    Tasks: 3 (limit: 3738)
   CGroup: /system.slice/gpsd.service
           └─608 /usr/sbin/gpsd -n /dev/ttySC0 /dev/pps0
 
Mar 28 18:20:40 DRAWSpi systemd[1]: Starting GPS (Global Positioning System) Dae
Mar 28 18:20:40 DRAWSpi systemd[1]: Started GPS (Global Positioning System) Daem
lines 1-11/11 (END)"

3- I am using a fresh NWDR image- I verified udrcver.sh is in the dir but I get no output:
"root@DRAWSpi:/home/pi/bin# which udrcver.sh
root@DRAWSpi:/home/pi/bin# "

4- I think I used the "nwdr19.img.xz" not the "current_image.xz" I am downloading the former and will start from scratch.

Thank you both for the help and appreciate the extra info on ./ info and links. I am always learning more about Linux.

Clifford

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.