Re: #audio #install #config #wsjtx #install #audio #wsjtx #config


Erwin OE1EKG
 

On Mon, Apr 19, 2021 at 06:06 PM, Basil Gunn wrote:
alsa-show.sh
Hi Basil,

I digged a little more in the setup like you proposed. Problem is in wsjt-x. Can't save the settings I made according your proposal - it ends up with a Hamlib error. Of course the same in JS8call

Hamlib error: IO error while opening connection to rig

I was not able to set frequency on the KX3

When I set the rig as KX3 instead of: Hamlib NET rigctl and Audio to alsa,input ... and alsa.output ... then I could set the frequency from the Pi and PPT was also running. But of course can't check the audio.

I did setalsa and the result looks fine, but have to wait for the audio cables.
pi@draws:~ $ alsa-show.sh
 ==== List All sound card device names (3)
card 0: b1 [bcm2835 HDMI 1]
card 1: Headphones [bcm2835 Headphones]
card 2: udrc [udrc]
 
 ======= DRAWS
 ===== ALSA Controls for Radio Transmit =====
LO Driver Gain  L:[-6.00dB] R:[-6.00dB]
PCM        L:[-19.50dB] R:[-19.50dB]
DAC Playback PT L:[P2] R:[P2]
LO Playback CM [Full Chip]
 
 ===== ALSA Controls for Radio Receive =====
ADC Level L:[-2.00dB] R:[-2.00dB]
IN1 L:[Off] R:[Off]
IN2 L:[10 kOhm] R:[10 kOhm]
CM L:[10 kOhm] R:[10 kOhm]

Then I run dmesg. Errors or warnings in bold.
pi@draws:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.79-v7l+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1373 SMP Mon Nov 23 13:27:40 GMT 2020
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 2061312
[    0.000000]   DMA zone: 2304 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 1864704 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920
[    0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2059008
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:FA:67:42 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e5760ac7-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x14c00000-0x18c00000] (64MB)
[    0.000000] Memory: 7800744K/8245248K available (10240K kernel code, 739K rwdata, 2816K rodata, 2048K init, 854K bss, 182360K reserved, 262144K cma-reserved, 7458816K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31111 entries in 61 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x344/0x518 with crng_init=0
[    0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000010] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000047] bcm2835: system timer (irq = 17)
[    0.000326] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000333] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000339] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000344] Switching to timer-based delay loop, resolution 18ns
[    0.000450] Console: colour dummy device 80x30
[    0.000465] printk: console [tty1] enabled
[    0.000489] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.000498] pid_max: default: 32768 minimum: 301
[    0.000560] LSM: Security Framework initializing
[    0.000645] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000655] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001273] Disabling memory control group subsystem
[    0.001330] CPU: Testing write buffer coherency: ok
[    0.001575] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001964] Setting up static identity map for 0x200000 - 0x20003c
[    0.002050] rcu: Hierarchical SRCU implementation.
[    0.002349] smp: Bringing up secondary CPUs ...
[    0.002925] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.003535] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004115] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004178] smp: Brought up 1 node, 4 CPUs
[    0.004185] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.004190] CPU: All CPU(s) started in HYP mode.
[    0.004195] CPU: Virtualization extensions available.
[    0.004578] devtmpfs: initialized
[    0.010824] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.010941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.010954] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.014585] pinctrl core: initialized pinctrl subsystem
[    0.015078] NET: Registered protocol family 16
[    0.016884] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.017142] audit: initializing netlink subsys (disabled)
[    0.017257] audit: type=2000 audit(0.010:1): state=initialized audit_enabled=0 res=1
[    0.017766] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.017772] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.017991] Serial: AMBA PL011 UART driver
[    0.019817] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.040372] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-11-30 22:12, variant start
[    0.050362] raspberrypi-firmware soc:firmware: Firmware hash is ab1181cc0cb6df52bfae3b1d3fef0ce7c325166c
[    0.078846] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.081223] vgaarb: loaded
[    0.081429] SCSI subsystem initialized
[    0.081529] usbcore: registered new interface driver usbfs
[    0.081553] usbcore: registered new interface driver hub
[    0.081595] usbcore: registered new device driver usb
[    0.081753] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[    0.082606] clocksource: Switched to clocksource arch_sys_counter
[    0.388484] VFS: Disk quotas dquot_6.6.0
[    0.388529] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.388603] FS-Cache: Loaded
[    0.388716] CacheFiles: Loaded
[    0.389176] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes, mapped to 0x(ptrval)
[    0.389184] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[    0.389399] Console: switching to colour frame buffer device 240x67
[    0.393754] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered!
[    0.397876] thermal_sys: Registered thermal governor 'step_wise'
[    0.398047] NET: Registered protocol family 2
[    0.398391] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.398404] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.398428] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.398457] TCP: Hash tables configured (established 8192 bind 8192)
[    0.398536] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.398556] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.398672] NET: Registered protocol family 1
[    0.399022] RPC: Registered named UNIX socket transport module.
[    0.399028] RPC: Registered udp transport module.
[    0.399033] RPC: Registered tcp transport module.
[    0.399038] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.399048] PCI: CLS 0 bytes, default 64
[    0.399941] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.400910] Initialise system trusted keyrings
[    0.401041] workingset: timestamp_bits=14 max_order=21 bucket_order=7
[    0.405645] FS-Cache: Netfs 'nfs' registered for caching
[    0.406000] NFS: Registering the id_resolver key type
[    0.406016] Key type id_resolver registered
[    0.406022] Key type id_legacy registered
[    0.406032] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.406537] Key type asymmetric registered
[    0.406543] Asymmetric key parser 'x509' registered
[    0.406626] bounce: pool size: 64 pages
[    0.406645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.406749] io scheduler mq-deadline registered
[    0.406755] io scheduler kyber registered
[    0.408544] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.408555] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    0.408584] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[    0.408613] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[    0.464683] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
[    0.464836] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.464844] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.464852] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    0.464879] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.464999] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.466465] PCI: bus0: Fast back to back transfers disabled
[    0.466593] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.466703] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.466992] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.468463] PCI: bus1: Fast back to back transfers disabled
[    0.468492] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.468502] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.468561] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.468571] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.468719] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    0.468823] pcieport 0000:00:00.0: PME: Signaling with IRQ 56
[    0.469003] pcieport 0000:00:00.0: AER: enabled with IRQ 56
[    0.469163] pci 0000:01:00.0: enabling device (0140 -> 0142)
[    0.514004] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x800 took 43811 usecs
[    0.517405] iproc-rng200 fe104000.rng: hwrng registered
[    0.517557] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.517860] vc-sm: Videocore shared memory driver
[    0.518116] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    0.523283] brd: module loaded
[    0.528979] loop: module loaded
[    0.529665] Loading iSCSI transport class v2.0-870.
[    0.530601] libphy: Fixed MDIO Bus: probed
[    0.530885] bcmgenet fd580000.ethernet: failed to get enet clock
[    0.530894] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    0.530903] bcmgenet fd580000.ethernet: failed to get enet-wol clock
[    0.530912] bcmgenet fd580000.ethernet: failed to get enet-eee clock
[    0.530930] bcmgenet: Skipping UMAC reset
[    0.542619] libphy: bcmgenet MII bus: probed
[    0.622653] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    0.623112] usbcore: registered new interface driver r8152
[    0.623143] usbcore: registered new interface driver lan78xx
[    0.623173] usbcore: registered new interface driver smsc95xx
[    0.623426] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.623441] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.624443] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
[    0.625085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.625092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.625098] usb usb1: Product: xHCI Host Controller
[    0.625105] usb usb1: Manufacturer: Linux 5.4.79-v7l+ xhci-hcd
[    0.625111] usb usb1: SerialNumber: 0000:01:00.0
[    0.625395] hub 1-0:1.0: USB hub found
[    0.625456] hub 1-0:1.0: 1 port detected
[    0.625745] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.625756] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.625766] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    0.626000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.626007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.626013] usb usb2: Product: xHCI Host Controller
[    0.626020] usb usb2: Manufacturer: Linux 5.4.79-v7l+ xhci-hcd
[    0.626025] usb usb2: SerialNumber: 0000:01:00.0
[    0.626265] hub 2-0:1.0: USB hub found
[    0.626295] hub 2-0:1.0: 4 ports detected
[    0.626942] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.627080] dwc_otg: FIQ enabled
[    0.627085] dwc_otg: NAK holdoff enabled
[    0.627090] dwc_otg: FIQ split-transaction FSM enabled
[    0.627097] Module dwc_common_port init
[    0.627290] usbcore: registered new interface driver uas
[    0.627343] usbcore: registered new interface driver usb-storage
[    0.627436] mousedev: PS/2 mouse device common for all mice
[    0.628287] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.629192] sdhci: Secure Digital Host Controller Interface driver
[    0.629197] sdhci: Copyright(c) Pierre Ossman
[    0.629475] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    0.629740] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.632069] ledtrig-cpu: registered to indicate activity on CPUs
[    0.632202] hidraw: raw HID events driver (C) Jiri Kosina
[    0.632266] usbcore: registered new interface driver usbhid
[    0.632271] usbhid: USB HID core driver
[    0.632805] vchiq: vchiq_init_state: slot_zero = (ptrval)
[    0.633916] [vc_sm_connected_init]: start
[    0.640097] [vc_sm_connected_init]: end - returning 0
[    0.641036] Initializing XFRM netlink socket
[    0.641053] NET: Registered protocol family 17
[    0.641103] Key type dns_resolver registered
[    0.641299] Registering SWP/SWPB emulation handler
[    0.641451] registered taskstats version 1
[    0.641461] Loading compiled-in X.509 certificates
[    0.641707] Key type ._fscrypt registered
[    0.641713] Key type .fscrypt registered
[    0.646394] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    0.646438] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
[    0.650713] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.651139] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    0.651146] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    0.697527] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.699063] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.700598] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.703358] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.704893] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.713359] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    0.714616] of_cfs_init
[    0.714676] of_cfs_init: OK
[    0.715093] Waiting for root device PARTUUID=e5760ac7-02...
[    0.749921] random: fast init done
[    0.767075] mmc1: new high speed SDIO card at address 0001
[    0.819634] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[    0.820110] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
[    0.821536]  mmcblk0: p1 p2
[    0.838958] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    0.838965] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    0.992624] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.175203] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    1.175210] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.175217] usb 1-1: Product: USB2.0 Hub
[    1.176538] hub 1-1:1.0: USB hub found
[    1.176803] hub 1-1:1.0: 4 ports detected
[    1.502625] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[    1.554017] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    1.554097] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[    1.554104] EXT4-fs (mmcblk0p2): recovery complete
[    1.562525] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.562569] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.563469] devtmpfs: mounted
[    1.567047] Freeing unused kernel memory: 2048K
[    1.592732] Run /sbin/init as init process
[    1.648874] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[    1.648881] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.648888] usb 1-1.3: Product: FT232R USB UART
[    1.648895] usb 1-1.3: Manufacturer: FTDI
[    1.648901] usb 1-1.3: SerialNumber: AH034AU9
[    1.967755] systemd[1]: System time before build time, advancing clock.
[    2.044113] NET: Registered protocol family 10
[    2.044747] Segment Routing with IPv6
[    2.073855] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.074281] systemd[1]: Detected architecture arm.
[    2.124660] systemd[1]: Set hostname to <draws>.
[    2.841330] systemd[1]: /lib/systemd/system/dovecot.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/dovecot/master.pid â /run/dovecot/master.pid; please update the unit file accordingly.
[    2.894722] random: systemd: uninitialized urandom read (16 bytes read)
[    2.900478] random: systemd: uninitialized urandom read (16 bytes read)
[    2.900524] systemd[1]: Reached target System Time Synchronized.
[    2.900733] random: systemd: uninitialized urandom read (16 bytes read)
[    2.901074] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.901337] systemd[1]: Listening on Syslog Socket.
[    2.902793] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.903148] systemd[1]: Listening on udev Control Socket.
[    2.903318] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.003103] i2c /dev entries driver
[    3.017216] NET: Registered protocol family 3
[    3.243299] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    3.283333] systemd-journald[113]: Received request to flush runtime journal from PID 1
[    3.648874] pps_core: LinuxPPS API ver. 1 registered
[    3.648882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...>
[    3.650461] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    3.650669] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    3.650865] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    3.651038] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    3.652252] pps pps0: new PPS source pps.-1
[    3.652299] pps pps0: Registered IRQ 58 as PPS source
[    3.705950] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    3.706980] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    3.706989] [vc_sm_connected_init]: start
[    3.717248] [vc_sm_connected_init]: installed successfully
[    3.736223] mc: Linux media interface: v0.10
[    3.764460] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    3.776100] videodev: Linux video capture interface: v2.00
[    3.780166] bcm2835_audio bcm2835_audio: card created with 4 channels
[    3.788135] bcm2835_audio bcm2835_audio: card created with 4 channels
[    3.859603] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    3.861857] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    3.876392] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    3.878026] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    3.882511] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    3.884949] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    3.886185] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    3.886559] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    3.886729] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    3.886891] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    3.886909] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    3.886919] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    3.886927] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    3.886935] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    3.887032] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    3.892377] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    3.892401] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    3.906760] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    3.906792] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    3.914865] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    3.914885] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    3.921004] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    3.921014] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff)
[    3.921021] fb0: switching to vc4drmfb from simple
[    3.925936] Console: switching to colour dummy device 80x30
[    3.926036] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.926042] [drm] No driver support for vblank timestamp query.
[    3.926047] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[    3.926304] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[    3.928783] vc4-drm gpu: HDMI-A-1: EDID is invalid:
[    3.928792] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928798] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928803] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928808] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928819] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928824] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.928830] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.946244] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.027675] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.068000] usbcore: registered new interface driver usbserial_generic
[    4.068032] usbserial: USB Serial support registered for generic
[    4.068411] brcmfmac: F1 signature read @0x18000000=0x15264345
[    4.075910] usbcore: registered new interface driver ftdi_sio
[    4.075941] usbserial: USB Serial support registered for FTDI USB Serial Device
[    4.076040] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[    4.076122] usb 1-1.3: Detected FT232RL
[    4.080968] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    4.081331] usbcore: registered new interface driver brcmfmac
[    4.083442] Console: switching to colour frame buffer device 240x67
[    4.088997] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[    4.107465] vc4-drm gpu: fb0: vc4drmfb frame buffer device
[    4.108894] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[    4.312542] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    4.324027] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[    4.495301] asoc-simple-card soc:sound: tlv320aic32x4-hifi <-> fe203000.i2s mapping ok
[    5.500903] uart-pl011 fe201000.serial: no DMA platform data
[    5.560482] random: crng init done
[    5.560489] random: 7 urandom warning(s) missed due to ratelimiting
[    5.643651] 8021q: 802.1Q VLAN Support v1.8
[    6.285540] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    6.432716] Adding 1048572k swap on /var/swap.  Priority:-2 extents:2359 across:2357916k SSFS
[    6.676164] bcmgenet: Skipping UMAC reset
[    6.677844] bcmgenet fd580000.ethernet: configuring instance for external RGMII
[    6.678050] bcmgenet fd580000.ethernet eth0: Link is Down
[    8.004527] warning: process `colord-sane' used the deprecated sysctl system call with 8.1.2.
[    8.323962] pps_ldisc: PPS line discipline registered
[    8.324898] pps pps1: new PPS source (null)0
[    8.324934] pps pps1: source "/dev/ttySC0" added
[    9.034298] broken atomic modeset userspace detected, disabling atomic
[   11.701347] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.714026] fuse: init (API version 7.31)
[   12.549729] Bluetooth: Core ver 2.22
[   12.549781] NET: Registered protocol family 31
[   12.549787] Bluetooth: HCI device and connection manager initialized
[   12.549802] Bluetooth: HCI socket layer initialized
[   12.549811] Bluetooth: L2CAP socket layer initialized
[   12.549825] Bluetooth: SCO socket layer initialized
[   12.561478] Bluetooth: HCI UART driver ver 2.3
[   12.561490] Bluetooth: HCI UART protocol H4 registered
[   12.561529] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   12.561701] Bluetooth: HCI UART protocol Broadcom registered
[   12.973689] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.973696] Bluetooth: BNEP filters: protocol multicast
[   12.973710] Bluetooth: BNEP socket layer initialized
[   13.118874] Bluetooth: RFCOMM TTY layer initialized
[   13.118890] Bluetooth: RFCOMM socket layer initialized
[   13.118910] Bluetooth: RFCOMM ver 1.11
[   15.925775] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
[  188.446790] v3d fec00000.v3d: MMU error from client L2T (0) at 0x3b61000, pte invalid

best regards
Erwin
 

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.