Re: On going issue with the draw and RMS-Gateway


Mike Lussier - AE4ML
 


gateway is AE4ML-10

pi@UDRC-RMSGATEWAY:~/n7nix/ax25 $ ./ax25-showcfg.sh 
 
 === Display kissparms & ax25dev-parms
port: 0, speed: 1200, slottime: 200, txdelay: 500, txtail: 100, persist: 32, t1 timeout: 3000, t2 timeout: 1000
port: 1, speed: 9600, slottime:  10, txdelay: 150, txtail: 50, persist: 32, t1 timeout: 2000, t2 timeout:  100
 
 == kissparms from /etc/ax25/ax25-upd
        $KISSPARMS -p ${PORTNAME_1} -f no -l $TXTAIL -r $PERSIST -s $SLOTTIME -t $TXDELAY
            $KISSPARMS -p ${PORTNAME_1} -f no -l $TXTAIL -r $PERSIST -s $SLOTTIME -t $TXDELAY
            $KISSPARMS -p ${PORTNAME_1} -f no -l $TXTAIL -r $PERSIST -s $SLOTTIME -t $TXDELAY
            $KISSPARMS -p ${PORTNAME_2} -f no -l $TXTAIL -r $PERSIST -s $SLOTTIME -t $TXDELAY
        $KISSPARMS -p ${PORTNAME_1} -f no -l $TXTAIL -r $PERSIST -s $SLOTTIME -t $TXDELAY
 
 ===== ax.25 config
Found directory: /proc/sys/net/ax25/ax0
ax25_default_mode: 0
backoff_type: 0
connect_mode: 2
dama_slave_timeout: 180000
extended_window_size: 32
idle_timeout: 900000
ip_default_mode: 0
maximum_packet_length: 255
maximum_retry_count: 6
protocol: 0
standard_window_size: 2
t1_timeout: 3000
t2_timeout: 1000
t3_timeout: 300000
 
Found directory: /proc/sys/net/ax25/ax1
ax25_default_mode: 0
backoff_type: 0
connect_mode: 2
dama_slave_timeout: 180000
extended_window_size: 32
idle_timeout: 900000
ip_default_mode: 0
maximum_packet_length: 255
maximum_retry_count: 6
protocol: 0
standard_window_size: 2
t1_timeout: 2000
t2_timeout: 100
t3_timeout: 300000
 
 
 ==== List All sound card device names (2)
card 0: Headphones [bcm2835 Headphones]
card 1: udrc [udrc]
 
 ======= DRAWS
 ===== ALSA Controls for Radio Transmit =====
LO Driver Gain  L:[0.00dB] R:[0.00dB]
PCM         L:[-2.00dB] R:[-2.00dB]
DAC Playback PT L:[P3] R:[P3]
LO Playback CM [Full Chip]
 
 ===== ALSA Controls for Radio Receive =====
ADC Level L:[0.00dB] R:[0.00dB]
IN1 L:[Off] R:[Off]
IN2 L:[10 kOhm] R:[10 kOhm]
CM L:[10 kOhm] R:[10 kOhm]
 
 
===== Port baudrate
DireWolf: udr0 speed: 1200, udr1 speed: 1200
AX.25:    udr0 speed: 1200, udr1 speed: 9600
 
===== axports
udr0        AE4ML-10            9600    255     2       Winlink port
udr1        AE4ML-0             9600    255     2       Direwolf port
 
 ===== ax25d.conf
[AE4ML-10 VIA udr0]
NOCALL   * * * * * *  L
default  * * * * * *  - rmsgw /usr/local/bin/rmsgw rmsgw -P %d %U
#
[AE4ML VIA udr0]
NOCALL   * * * * * *  L
default  * * * * * *  - pi /usr/local/bin/wl2kax25d wl2kax25d -c %U -a %d
 
 ===== wl2k.conf
paclink-unix not configured.
 

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.