Re: #upgrade #draws #configuration #draws #upgrade #configuration


Erwin OE1EKG
 

Hello Basil,

thanks for the fast response - alle run flawless. Is ti necessary to put the kernel hold again on the image? One thing I faces was the PAT - I had the problem in the past #5725   nresolved. Did an update from 0.10 to 0.11 
Below is the terminal output and waterfall shows graphic, but cannot open http://localhost:8080/

73 de Erwin, OE1EKG

pi@draws:~/n7nix/ardop $ ./ardop_ctrl.sh -a kx2 start
Service: draws-manager is already stopped
Service: direwolf is already stopped
Setting radio name to: radio_kx2, rig name: K3/KX3
Starting service: rigctld
Starting service: ardop
Starting service: pat
 
pi@draws:~/bin $ ./piardopc 8515 plughw:2,0 plughw:2,0 -p GPIO=12
ARDOPC Version 1.0.4.1j-BPQ
GPIO interface for PTT available
Using GPIO pin 12 for PTT
ARDOPC listening on port 8515
Capture Devices
 
Card 0, ID `b1', name `bcm2835 HDMI 1'
 
Card 1, ID `Headphones', name `bcm2835 Headphones'
 
Card 2, ID `udrc', name `udrc'
  Device hw:2,0 ID `bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0', name `bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0', 1 subdevices (1 available)
    2 channels,  sampling rate 8000..192000 Hz
 
Playback Devices
 
Card 0, ID `b1', name `bcm2835 HDMI 1'
  Device hw:0,0 ID `bcm2835 HDMI 1', name `bcm2835 HDMI 1', 4 subdevices (4 available)
    1..8 channels, sampling rate 8000..192000 Hz
 
Card 1, ID `Headphones', name `bcm2835 Headphones'
  Device hw:1,0 ID `bcm2835 Headphones', name `bcm2835 Headphones', 4 subdevices (4 available)
    1..8 channels, sampling rate 8000..192000 Hz
 
Card 2, ID `udrc', name `udrc'
  Device hw:2,0 ID `bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0', name `bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0', 1 subdevices (1 available)
    2 channels,  sampling rate 8000..192000 Hz
 
Opening Playback Device plughw:2,0 Rate 12000
Opening Capture Device plughw:2,0 Rate 12000
ARDOPC listening on port 8515
bind(sock) failed port 8515 Error 98
bind(sock) failed port 8516 Error 98
Input peaks = -666, 451
Input peaks = -679, 461
Input peaks = -627, 562
Input peaks = -658, 598
Input peaks = -660, 410
Input peaks = -622, 443
Input peaks = -673, 470
Input peaks = -586, 496
Input peaks = -576, 386
Input peaks = -626, 525
Input peaks = -599, 429
Input peaks = -604, 434
Input peaks = -739, 478
Input peaks = -745, 488
Input peaks = -690, 474
 

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.