Date   

Re: DRAWS RPI Image

 

It is being worked on this weekend.  If all goes well, a beta will be available early next week. 



On Thu, Dec 6, 2018, 20:31 Jeff Marden via Groups.Io <jmardensdl=netscape.net@groups.io wrote:
Hello All:

Update on when the working DRAWS loadable image will be available?

It's been a couple of weeks since I received my early DRAWS board and I've no success with the "build it yourself" image and instructions offered to this point (Not yet a linux guy).

Great that a new batch of boards is coming, but we need the loadable image now.

Thanks,
--
Jeff Marden
N1JCM


DRAWS RPI Image

Jeff Marden
 

Hello All:

Update on when the working DRAWS loadable image will be available?

It's been a couple of weeks since I received my early DRAWS board and I've no success with the "build it yourself" image and instructions offered to this point (Not yet a linux guy).

Great that a new batch of boards is coming, but we need the loadable image now.

Thanks,
--
Jeff Marden
N1JCM


Re: (longer) DRAWS power cable? #draws #power

Steve Stroh
 

Thanks for that lead. After browsing Amazon, now I understand why NWDR
didn't supply a longer cable.

Time to warm up the soldering iron.

On Thu, Dec 6, 2018 at 10:57 AM Bryan Hoyer <bhhoyer@gmail.com> wrote:

Connector is JST XRH Series

On Dec 6, 2018, at 10:38 AM, Steve Stroh <steve.stroh@gmail.com> wrote:

Anyone have a lead on a longer power cable for a DRAWS?

Yes, I know I can splice a longer cable onto the one that's supplied
with the unit, but I'd rather not.

I'm sure there's something on Amazon, but I don't even know what to
call that particular connector.

Thanks,

Steve N8GNJ

--
Steve Stroh (personal / general): stevestroh@gmail.com




--
Steve Stroh (personal / general): stevestroh@gmail.com


Re: (longer) DRAWS power cable? #draws #power

 

Connector is JST XRH Series

On Dec 6, 2018, at 10:38 AM, Steve Stroh <steve.stroh@gmail.com> wrote:

Anyone have a lead on a longer power cable for a DRAWS?

Yes, I know I can splice a longer cable onto the one that's supplied
with the unit, but I'd rather not.

I'm sure there's something on Amazon, but I don't even know what to
call that particular connector.

Thanks,

Steve N8GNJ

--
Steve Stroh (personal / general): stevestroh@gmail.com



(longer) DRAWS power cable? #draws #power

Steve Stroh
 

Anyone have a lead on a longer power cable for a DRAWS?

Yes, I know I can splice a longer cable onto the one that's supplied
with the unit, but I'd rather not.

I'm sure there's something on Amazon, but I don't even know what to
call that particular connector.

Thanks,

Steve N8GNJ

--
Steve Stroh (personal / general): stevestroh@gmail.com


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

art upton <artupton@...>
 

Hi Rod, I noticed that when PSK31 started to be popular. I had to get the Tip/Ring/Shield Plug for my Bux-Com box for my ft-847. 
The 847 the only one that I have seen in the Yasue line like that below the high end contest series of radios. The advantage back then was having a VHF/UHF TNC pluged in and the HF modes on the other plug plugged in at the same time.  

Art

On Tuesday, December 4, 2018, 7:43:49 PM EST, Roderick Wayne Hart Sr. <rod.hart@...> wrote:


I uncovered an interesting problem/feature here with my ft-847. I have had the rig since they were first introduced but never really used it. I tried to get DRAW working on HF with the supplied cables. After a lot of grief I found out the rig has separate data and pkt interfaces. The din6 connector works fine with pkt interface for dire wolf on vhf and uhf. You will need a different cable with a mini 3 conductor plug to use the data interface on hf. You will have to make sure to avoid the ptt used with the din6 cable since it's activation automatically route output to the pkt interface which is vhf/uhf.



On December 4, 2018, at 7:35 AM, "art upton via Groups.Io" <artupton@...> wrote:


Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Roderick Wayne Hart Sr.
 

I uncovered an interesting problem/feature here with my ft-847. I have had the rig since they were first introduced but never really used it. I tried to get DRAW working on HF with the supplied cables. After a lot of grief I found out the rig has separate data and pkt interfaces. The din6 connector works fine with pkt interface for dire wolf on vhf and uhf. You will need a different cable with a mini 3 conductor plug to use the data interface on hf. You will have to make sure to avoid the ptt used with the din6 cable since it's activation automatically route output to the pkt interface which is vhf/uhf.



On December 4, 2018, at 7:35 AM, "art upton via Groups.Io" <artupton@...> wrote:


Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Basil Gunn
 

Jack Spitznagel <kd4iz@frawg.org> writes:

Thanks Basil, I understand that. But direwolf is supposed to send
packets itself and will also digipeat. It trys to do that and keys the
rig, but no sound regardless if Xastir is running. I just want to
figure out why no TX tones. the two TX level adjustments have no
effect.
Can't offer you much. Just for grins I just did a fresh install using my
scripts & these notes for Xastir running on a Rpi/DRAWS combo.
(https://github.com/nwdigitalradio/n7nix/tree/master/xastir)
Worked the first time including sound alerts. I haven't played with the
gps yet. Radio I am using is a Kenwood TM-V71a

I always install ax.25 because things are easier to debug that way and I
treat Direwolf as a sound modem only ie. I do not use Direwolf as a
digipeater or expect it to ever send packets itself.

/Basil n7nix

On Dec 4, 2018, at 18:13, Basil Gunn <basil@pacabunga.com> wrote:



Basically direwolf can key both the FT 817 and the IC 7000, but no
signal, just a very short dead carrier. Xastir is not keying direwolf.
Note that Direwolf numbers the audio channels 0 & 1 and Xastir numbers
them 1 & 2.

/Basil



Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Jack Spitznagel
 

Brian,
Thanks for checklist. Many are checked already but will start back at top when I get home.
Jack KD4IZ

On Dec 4, 2018, at 18:43, Brian Badger <brian@badgerfamily.com> wrote:

Possibilities:

Mini din not seated in draws
Mini din not seated in radio
Radio not set to packet mode
Radio packet mode not set to 1200
Direwolf config file issue
Alsa mixer config issue
Competing process stealing audio device
Bad draws software install

Anything I missed?

Brian N0KZ
On Dec 4, 2018, at 4:19 PM, Jack Spitznagel <kd4iz@frawg.org> wrote:

Thanks Basil,
I understand that.
But direwolf is supposed to send packets itself and will also digipeat. It trys to do that and keys the rig, but no sound regardless if Xastir is running. I just want to figure out why no TX tones. the two TX level adjustments have no effect.
On Dec 4, 2018, at 18:13, Basil Gunn <basil@pacabunga.com> wrote:



Basically direwolf can key both the FT 817 and the IC 7000, but no
signal, just a very short dead carrier. Xastir is not keying direwolf.
Note that Direwolf numbers the audio channels 0 & 1 and Xastir numbers
them 1 & 2.

/Basil



--
J Spitznagel
Science River LLC
KD4IZ



--
J Spitznagel
Science River LLC
KD4IZ


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Brian Badger
 

Possibilities:

Mini din not seated in draws
Mini din not seated in radio
Radio not set to packet mode
Radio packet mode not set to 1200
Direwolf config file issue
Alsa mixer config issue
Competing process stealing audio device
Bad draws software install

Anything I missed?

Brian N0KZ

On Dec 4, 2018, at 4:19 PM, Jack Spitznagel <kd4iz@frawg.org> wrote:

Thanks Basil,
I understand that.
But direwolf is supposed to send packets itself and will also digipeat. It trys to do that and keys the rig, but no sound regardless if Xastir is running. I just want to figure out why no TX tones. the two TX level adjustments have no effect.
On Dec 4, 2018, at 18:13, Basil Gunn <basil@pacabunga.com> wrote:



Basically direwolf can key both the FT 817 and the IC 7000, but no
signal, just a very short dead carrier. Xastir is not keying direwolf.
Note that Direwolf numbers the audio channels 0 & 1 and Xastir numbers
them 1 & 2.

/Basil



--
J Spitznagel
Science River LLC
KD4IZ



Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

art upton <artupton@...>
 

FYI , my install path:
Installed Stretch/compass image from the link John provided.
I did the chrony direwolf apt-get , and only set Chrony up and verified the GPS programs worked after setting overlay to Draws from UDRC.
I then complied and installed Fldigi and Flrig via source plus options as per the described web page,  giving me a 4.0.18 build.
I then checked Fldigi and got TX audio fine and no RX audio.
I installed JS8Call from the .deb file and got the same issue.
I verified with both cables to make sure one was not bad.

I then ran the script for mixers that John had under the Direwolf config setup.
That gave me TX as small tiny noises, and still no RX audio.
I verified with 2 different radios, the FT-891 and FT-817. The FT-817 would mute when set to DIGI or PKT modes FYI.
I checked the program install by using a 6-pin cord Signal Link for the audio modem and the software/radio TX/RX just fine.

I did the work around Bryan described on the mixer for the Audio out vs Discriminator out pins that is needed between what is needed for 9600 baud and HF audio.
That had no different results but it probably helped the last step(?)

I never made any attempt to run Direwolf or any other program.
Bryan made note about Direwolf problems and I verified no process was running called that.
Next on a whim, I apt-get removed Direwolf, rebooted and FLdigi HF works TX and RX now on the 2 different Yaesu different rigs I had tried this on.

Next I verified good decode on my own equipment on dummy load; and just now worked YV1SW from NW-Ohio on PSK31 with good signal reports at 20watts out on the FT-891 into a 33 foot vert on 40 meters. First QSO on Draws.

Art - K8XG

On Tuesday, December 4, 2018, 4:58:22 PM EST, John D Hays - K7VE <john@...> wrote:


I don't believe so, I installed direwolf first then fldigi.

On Tue, Dec 4, 2018 at 1:25 PM Jack Spitznagel <kd4iz@...> wrote:
Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 


On Dec 4, 2018, at 16:21, Bryan Hoyer <bhhoyer@...> wrote:

Good!

I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...> wrote:

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf  

I rebooted and Fldigi works in receive and tx as it should.

Fascinating, "With lifted Spock like eyebrows"

Art

On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...> wrote:


Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.

This is a sw issue that we’re working on.

On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...> wrote:

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   




--
J Spitznagel
Science River LLC
KD4IZ


--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Jack Spitznagel
 

Thanks Basil,
I understand that.
But direwolf is supposed to send packets itself and will also digipeat. It trys to do that and keys the rig, but no sound regardless if Xastir is running. I just want to figure out why no TX tones. the two TX level adjustments have no effect.

On Dec 4, 2018, at 18:13, Basil Gunn <basil@pacabunga.com> wrote:



Basically direwolf can key both the FT 817 and the IC 7000, but no
signal, just a very short dead carrier. Xastir is not keying direwolf.
Note that Direwolf numbers the audio channels 0 & 1 and Xastir numbers
them 1 & 2.

/Basil


--
J Spitznagel
Science River LLC
KD4IZ


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Basil Gunn
 

Basically direwolf can key both the FT 817 and the IC 7000, but no
signal, just a very short dead carrier. Xastir is not keying direwolf.
Note that Direwolf numbers the audio channels 0 & 1 and Xastir numbers
them 1 & 2.

/Basil


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Jack Spitznagel
 

John,

This is puzzling because going back to direwolf configuration itself, I never got the TX volume up to where it can be heard at 1200b. There also seems to be a TXDELAY issue. 

Basically direwolf can key both the FT 817 and the IC 7000, but no signal, just a very short dead carrier. Xastir is not keying direwolf. 

Tempted to move on to compiling and installing fldigi and come back to the packet stuff later.

All has to wait until next week since I am out of town.

Jack KD4IZ 


On Dec 4, 2018, at 16:59, John D Hays - K7VE <john@...> wrote:

Then WSJT-X

On Tue, Dec 4, 2018 at 1:58 PM John D Hays - K7VE <john@...> wrote:
I don't believe so, I installed direwolf first then fldigi.

On Tue, Dec 4, 2018 at 1:25 PM Jack Spitznagel <kd4iz@...> wrote:
Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 



--


John D. Hays
Edmonds, WA
K7VE

   


--
J Spitznagel
Science River LLC
KD4IZ


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Brian Badger
 

Just for point of data, I installed direwolf first and fldigi (by source) second according to previous emails and have no issues with any mode or band.

When I first heard the description I thought that my problem getting the mini dins to fully seat could be at fault (always check that) but it also appears that we need a procedure to verify the audio device driver isn’t being held by another process.

Brian N0KZ


On Dec 4, 2018, at 2:57 PM, John D Hays - K7VE <john@...> wrote:

I don't believe so, I installed direwolf first then fldigi.

On Tue, Dec 4, 2018 at 1:25 PM Jack Spitznagel <kd4iz@...> wrote:
Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 


On Dec 4, 2018, at 16:21, Bryan Hoyer <bhhoyer@...> wrote:

Good!

I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...> wrote:

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf  

I rebooted and Fldigi works in receive and tx as it should.

Fascinating, "With lifted Spock like eyebrows"

Art

On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...> wrote:


Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.

This is a sw issue that we’re working on.

On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...> wrote:

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   




--
J Spitznagel
Science River LLC
KD4IZ



--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

 

Then WSJT-X


On Tue, Dec 4, 2018 at 1:58 PM John D Hays - K7VE <john@...> wrote:
I don't believe so, I installed direwolf first then fldigi.

On Tue, Dec 4, 2018 at 1:25 PM Jack Spitznagel <kd4iz@...> wrote:
Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 



--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

 

I don't believe so, I installed direwolf first then fldigi.

On Tue, Dec 4, 2018 at 1:25 PM Jack Spitznagel <kd4iz@...> wrote:
Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 


On Dec 4, 2018, at 16:21, Bryan Hoyer <bhhoyer@...> wrote:

Good!

I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...> wrote:

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf  

I rebooted and Fldigi works in receive and tx as it should.

Fascinating, "With lifted Spock like eyebrows"

Art

On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...> wrote:


Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.

This is a sw issue that we’re working on.

On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...> wrote:

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   




--
J Spitznagel
Science River LLC
KD4IZ



--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

 

John did the setup, I’ll let him elaborate.

On Dec 4, 2018, at 1:25 PM, Jack Spitznagel <kd4iz@...> wrote:

Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 


On Dec 4, 2018, at 16:21, Bryan Hoyer <bhhoyer@...> wrote:

Good!

I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...> wrote:

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf  

I rebooted and Fldigi works in receive and tx as it should.

Fascinating, "With lifted Spock like eyebrows"

Art

On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...> wrote:


Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.

This is a sw issue that we’re working on.

On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...> wrote:

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is 
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have 
to do? J


Joe K3JV






-- 


John D. Hays
Edmonds, WA
K7VE

   




-- 
J Spitznagel
Science River LLC
KD4IZ


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

Jack Spitznagel
 

Bryan,

Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first?

Thanks, 
Jack 
KD4IZ 


On Dec 4, 2018, at 16:21, Bryan Hoyer <bhhoyer@...> wrote:

Good!

I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...> wrote:

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf  

I rebooted and Fldigi works in receive and tx as it should.

Fascinating, "With lifted Spock like eyebrows"

Art

On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...> wrote:


Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.

This is a sw issue that we’re working on.

On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...> wrote:

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   




--
J Spitznagel
Science River LLC
KD4IZ


Re: DRAWS downloadable Image? #setup #compassimage #draws #earlyadopters

 

Good!

I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

On Dec 4, 2018, at 1:19 PM, art upton via Groups.Io <artupton@...> wrote:

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following:
sudo apt-get remove direwolf  

I rebooted and Fldigi works in receive and tx as it should.

Fascinating, "With lifted Spock like eyebrows"

Art

On Tuesday, December 4, 2018, 10:44:32 AM EST, Bryan Hoyer <bhhoyer@...> wrote:


Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time.

This is a sw issue that we’re working on.

On Dec 4, 2018, at 4:35 AM, art upton via Groups.Io <artupton@...> wrote:

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call.
See my other posts to Bryan on this issue, the work around posted does not work either.

The TX only supplies a low ticking noise , and no RC audio from the HF radio is getting to any of the applications. 

Art

On Tuesday, December 4, 2018, 12:35:12 AM EST, John D Hays - K7VE <john@...> wrote:



On Mon, Dec 3, 2018 at 5:14 PM Joseph Vilardo <jvilardo@...> wrote:
Hi folks

I have DRAWS setup on my RPi 3B+ with Direwolf and YAAC and it is
running smoothly. I want to get FLDIGI to run with DRAWS, what do I have
to do? J


Joe K3JV






--


John D. Hays
Edmonds, WA
K7VE

   



3761 - 3780 of 5890