Date   

Re: TODO list? Re: #draws #compass #dstar

Jack Spitznagel
 

Brian, Basil, All,

 

@ Basil – which copy of direwolf.conf does your start up script modify? I am missing the obvious as usual…

 

With Beta2-

So wsjt and fldigi were a slam-dunk here, they just worked without mods (I still need to adjust the screen parameters to get wsjt on the 7 inch touch screen)… I used the audio setup that was in audio setup routine and did not try to use the original audio setup script.

 

This was the first time I was able to reliably get a waterfall on any program!

 

Basil’s solution for the activation of direwolf worked (and YACC, but Xastir was still being goofy). When running direwolf as a system process, there is not an active monitor terminal as is the case when run directly from commandline or the GUI menu. In my attempt to get it to work by playing with the .conf file, I messed up something and lost the GPS. In process of trying to fix that I lost the PTT.  Since Beta4 is available, I am just going to flash another image and start up slow again.

 

KD4IZ

Jack Spitznagel

FM19oo

 

 

 

 

 

From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Brian Badger
Sent: Saturday, December 15, 2018 14:40
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] TODO list? Re: #draws #compass #dstar

 

I have no urgent needs for anything DRAWS related.  I know I'm an early adopter -- I get it.  But it would be really helpful if there was some kind of TODO list so I know what I should even be messing with. 

1) Direwolf, YAAC, XASTIR, gpsd, chronyd - working
2) fldigi - working, but amixer settings not documented?
3) virtual audio devices - not working?
4) dstarrepeater - not working?

Regarding #2, I didn't understand the comments about "AUDIOOUT" "DISCOUT" -- the comments don't appear to match the mixer settings.  From the schematics it looks like IN1 is the DISCOUT and IN2 is the AUDIOOUT.  I changed the amixer settings script thus to enable fldigi: 

# Set channel 0 

sset 'CM_L to Left Mixer Negative Resistor' '10 kOhm'

sset 'IN1_L to Left Mixer Positive Resistor' 'Off'

sset 'IN2_L to Left Mixer Positive Resistor' '10 kOhm'

# Set channel 1

sset 'CM_R to Right Mixer Negative Resistor' '10 kOhm'

sset 'IN1_R to Right Mixer Positive Resistor' 'Off'

sset 'IN2_R to Right Mixer Positive Resistor' '10 kOhm'

 


--
J Spitznagel
Science River LLC
KD4IZ


Re: TODO list? Re: #draws #compass #dstar

 



On Sat, Dec 15, 2018 at 11:39 AM Brian Badger <brian@...> wrote:
I have no urgent needs for anything DRAWS related.  I know I'm an early adopter -- I get it.  But it would be really helpful if there was some kind of TODO list so I know what I should even be messing with. 

1) Direwolf, YAAC, XASTIR, gpsd, chronyd - working
2) fldigi - working, but amixer settings not documented?
alsamixer settings are generally by radio, not application.  Once they are set for a radio, you can move from program to program.  [Not all radios are equal, and not all radios have been tested.]
 
3) virtual audio devices - not working?

Virtual audio devices work, as far as the OS is concerned.  Most applications don't enumerate them, and there is a small change in application code to make them work properly for non-streaming applications.

 
4) dstarrepeater - not working?
I haven't had a chance to test out yet, but it should be able to work -- just may take a different approach than the UDRC configuration as it was primarily focused on the UDRC/UDRC II and doesn't recognize the EPROM setting for the DRAWS yet.


John D. Hays
Edmonds, WA
K7VE

   


Re: Beta Image Available #betaimage #draws

 

Looks good, btw, if you do

chronyc sources -v 

It has a legend for the meaning of the various values.


On Sat, Dec 15, 2018 at 12:21 PM David [kg5eiu] via Groups.Io <dcappello=aol.com@groups.io> wrote:
Downloaded the beta 4 image today (dec 15, 2018) setup the pi and OS
location, enabled VNC and followed 
the beginning of this thread for setup/config working good - next to
get a radio hooked up.

--


John D. Hays
Edmonds, WA
K7VE

   


Re: Beta Image Available #betaimage #draws

David [kg5eiu]
 

Downloaded the beta 4 image today (dec 15, 2018) setup the pi and OS
location, enabled VNC and followed 
the beginning of this thread for setup/config working good - next to
get a radio hooked up.


TODO list? Re: #draws #compass #dstar

Brian Badger
 

I have no urgent needs for anything DRAWS related.  I know I'm an early adopter -- I get it.  But it would be really helpful if there was some kind of TODO list so I know what I should even be messing with. 

1) Direwolf, YAAC, XASTIR, gpsd, chronyd - working
2) fldigi - working, but amixer settings not documented?
3) virtual audio devices - not working?
4) dstarrepeater - not working?

Regarding #2, I didn't understand the comments about "AUDIOOUT" "DISCOUT" -- the comments don't appear to match the mixer settings.  From the schematics it looks like IN1 is the DISCOUT and IN2 is the AUDIOOUT.  I changed the amixer settings script thus to enable fldigi: 

# Set channel 0 
sset 'CM_L to Left Mixer Negative Resistor' '10 kOhm'
sset 'IN1_L to Left Mixer Positive Resistor' 'Off'
sset 'IN2_L to Left Mixer Positive Resistor' '10 kOhm'
# Set channel 1
sset 'CM_R to Right Mixer Negative Resistor' '10 kOhm'
sset 'IN1_R to Right Mixer Positive Resistor' 'Off'
sset 'IN2_R to Right Mixer Positive Resistor' '10 kOhm'
 


Re: #draws #compass #dstar #dstar #draws #compass

 

Hold off unless you have an urgent need Anna is working on something. 


On Sat, Dec 15, 2018, 11:13 Brian Badger <brian@... wrote:
Before I debug any further, is DRAWS supported as a dstarrepeater controller yet?

12:08:38: Opened hw:1,0 hw:1,0 Rate 48000
12:08:38: Error: UDRCController: Unknown product Detected
12:08:38: Error: Unknown NW Digital Radio Product
12:08:38: Error: Cannot open the hardware interface - UDRC
12:08:38: Starting ALSA writer thread
12:08:38: Starting ALSA reader thread
12:08:38: Starting Sound Card Controller thread

--
Brian N0KZ
 


#draws #compass #dstar #dstar #draws #compass

Brian Badger
 

Before I debug any further, is DRAWS supported as a dstarrepeater controller yet?

12:08:38: Opened hw:1,0 hw:1,0 Rate 48000
12:08:38: Error: UDRCController: Unknown product Detected
12:08:38: Error: Unknown NW Digital Radio Product
12:08:38: Error: Cannot open the hardware interface - UDRC
12:08:38: Starting ALSA writer thread
12:08:38: Starting ALSA reader thread
12:08:38: Starting Sound Card Controller thread

--
Brian N0KZ
 


Re: (longer) DRAWS power cable? #draws #power

Jack Spitznagel
 

Gayland,
I looked without success and did this as a temporal measure:
image1.jpeg

Eventually the pigtail will be mounted in the deeper version back cover of the SweetiPi Case along with a 4500mAH lithium cell and a mini power switch. Just going to use a standard 12V coaxial socket to connect to the power source using the PowerPole connectors
Jack -KD4IZ 

On Dec 15, 2018, at 12:53, Gayland Gump <kg7gcf@...> wrote:

Does anyone have a source for the power pigtails for the DRAWS?  I'll likely need a few as I learn how to put Anderson Power Pole connectors on the non-terminated end of the pigtail.  The one I got with the DRAWS is already getting too short as I fail my way through to having enough experience and technique to achieve success.

Gayland
KG7GCF


On Thu, Dec 6, 2018 at 10:57 AM Bryan Hoyer <bhhoyer@...> wrote:
Connector is JST XRH Series

> On Dec 6, 2018, at 10:38 AM, Steve Stroh <steve.stroh@...> wrote:
>
> Anyone have a lead on a longer power cable for a DRAWS?
>
> Yes, I know I can splice a longer cable onto the one that's supplied
> with the unit, but I'd rather not.
>
> I'm sure there's something on Amazon, but I don't even know what to
> call that particular connector.
>
> Thanks,
>
> Steve N8GNJ
>
> --
> Steve Stroh (personal / general): stevestroh@...
>
>
>





--
J Spitznagel
Science River LLC
KD4IZ


Re: (longer) DRAWS power cable? #draws #power

Gayland Gump
 

Does anyone have a source for the power pigtails for the DRAWS?  I'll likely need a few as I learn how to put Anderson Power Pole connectors on the non-terminated end of the pigtail.  The one I got with the DRAWS is already getting too short as I fail my way through to having enough experience and technique to achieve success.

Gayland
KG7GCF


On Thu, Dec 6, 2018 at 10:57 AM Bryan Hoyer <bhhoyer@...> wrote:
Connector is JST XRH Series

> On Dec 6, 2018, at 10:38 AM, Steve Stroh <steve.stroh@...> wrote:
>
> Anyone have a lead on a longer power cable for a DRAWS?
>
> Yes, I know I can splice a longer cable onto the one that's supplied
> with the unit, but I'd rather not.
>
> I'm sure there's something on Amazon, but I don't even know what to
> call that particular connector.
>
> Thanks,
>
> Steve N8GNJ
>
> --
> Steve Stroh (personal / general): stevestroh@...
>
>
>





Re: Beta Image Available #betaimage #draws

 

If you are using the image, you can just go into /etc/chrony/chrony.conf and comment out these lines (near the bottom)

refclock SHM 0 refid GPS precision 1e-3 offset 0.5 delay 0.2 poll 3 trust require
refclock SHM 2 refid PPS precision 1e-9 poll 3 trust

sudo systemctl enable chrony
sudo systemctl restart chrony

And to see the hosts it is using on the Internet

chronyc sources




On Fri, Dec 14, 2018 at 8:48 PM Ed via Groups.Io <elancki=yahoo.com@groups.io> wrote:
If I am not yet using the DRAWS hat, can chrony be configured to set the RPi clock based on an NTP server or pool?

Thanks & 73,
Ed
N2BHD



--


John D. Hays
Edmonds, WA
K7VE

   


Re: Beta Image Available #betaimage #draws

Ed
 

If I am not yet using the DRAWS hat, can chrony be configured to set the RPi clock based on an NTP server or pool?

Thanks & 73,
Ed
N2BHD


Re: Beta Image Available #betaimage #draws

Mike - KB0FX
 

Basil,

Thanks for the addition information. I run Ubuntu 18.10 as my main operating system but I run just about every operating system you can think of with my multiple computers. I have everything from Windows 95 through Windows 10 running as well as MAC OS, IOS & Android. I am also running Virtual Box on Ubuntu. That said I somethings get confused with all the different things I am running in the shack! 

73

Mike - KB0FX
image.png

On Fri, Dec 14, 2018 at 11:59 AM Basil Gunn <basil@...> wrote:

Mike,

Thank you very much for the screen shots. For me personally it means a
lot to hear of your success.

Since you are going to be using FLDigi you will need to turn direwolf
off before running that program.

I have a couple of scripts that allow you to do that in the following
directory:

~/n7nix/systemd/bin/

ax25-stop will unload all the ax.25 stuff & stop direwolf for your
current session. ie. if you reboot ax.25 & direwolf will be running
again.

ax25-disable will stop the ax.25 & direwolf services from loading
between RPi reboots.

This script in ~/bin will let you know what ax25 & direwolf processes
are running, would be good to run it before starting up FLDigi to be
sure direwolf has been stopped.

ax25-status

Also I am working on an install problem so there will be yet another
draws-beta image either today or tomorrow.

Thanks again for the screen shots.

/Basil n7nix



Mike - KB0FX <mweilb@...> writes:

> John & Basil - Thank you very much for the Beta image and the additional
> information on how to run the script to get Direwolf running. This morning
> I did a greenfield install of the beta image on a brand new Raspberry Pi 3
> Model B+ and everything just worked! So have I have GPS, Chrony and
> Direwolf working. I am using a Icom IC-2720 on APRS. Hope to try FLDIGI
> this afternoon. See my screen shots below.
>
> Thanks
>
> Mike - KB0FX
>
>
>
> On Thu, Dec 13, 2018 at 12:01 PM Basil Gunn <basil@...> wrote:
>
>>
>> If you want direwolf functionality with the draws hat do this:
>>
>> cd
>> cd n7nix/config
>> sudo su
>> ./app_config.sh core
>>
>> This will run a script that sets up AX.25, direwolf & systemd
>>
>> Now reboot your RPi & confirm your installation is working:
>>
>> Receive
>> Tune your radio to the 1200 baud APRS frequency: 144.39 because there
>> should be lots of traffic there.
>>
>> tail -f /var/log/direwolf/direwolf.log
>> or
>> become root & run listen -at in a console window
>>
>> Transmit
>> Tune your radio to the 1200 baud APRS frequency: 144.39
>> cd
>> cd n7nix/debug
>> sudo su
>> ./btest.sh -P [udr0|udr1]
>> This will send either a position beacon or a message beacon
>> with the -p or -m options.
>>
>> Using a browser go to: https://aprs.fi/
>> Under Other Views, click on raw packets
>> Put your call sign followed by an asterisk in "Originating callsign"
>> Click search, you should see the beacon you just transmitted.
>>
>> After that you can configure rmsgw, paclink-unix or someother packet
>> program that requires direwolf ie.:
>>
>> ./app_config.sh rmsgw
>> ./app_config.sh plu
>>
>> If you want to run some other program that does NOT use direwolf then do
>> this:
>> cd
>> cd bin
>> sudo su
>> ./ax25-stop
>> This will bring down direwolf & all the ax.25 services.
>>
>> I will put this in a markdown doc file later on today.
>>
>> /Basil
>>
>> John D Hays - K7VE <john@...> writes:
>>
>> > A Beta image is available for download at
>> > http://nwdig.net/downloads/draws_beta2.zip
>> >
>> > (This location may change.)
>> >
>> > Unzip the file which will create draws_beta2.img
>> > Use an SD Card of at least 8 GB and copy the img file with an image
>> burner
>> > like Etcher <https://www.balena.io/etcher/> or dd under Linux.
>> >
>> > Insert into Raspberry Pi (with DRAWS HAT)
>> > Boot up.  It will expand the file system to fill your SD card.
>> >
>> > User: pi / nwcompass  but it will autologin and present GUI.
>> >
>> > Run *raspi-config* to set timezone and enable ssh and vnc if desired.
>> >
>> > If the GPS antenna is installed:
>> >
>> > *sudo systemctl enable gpsd*
>> >
>> > *sudo systemctl start gpsdsudo systemctl restart chrony*
>> >
>> > Explore the menu system and desktop Icons.  (The Direwolf menu item is
>> > broken.)
>> >
>> > To start and stop direwolf use:
>> >
>> > *sudo systemctl start direwolf*
>> > *sudo systemctl stop direwolf*
>> >
>> > Application support should be directed to the author of each application.
>> > Use Raspbian support for OS questions.  General questions can be asked in
>> > this group. (Check Wiki as well)
>> >
>> > There are many applications installed, you can see the install scripts in
>> > /home/pi/n7nix and an install log in /var/log
>> >
>> > More information will be provided, but getting this out for those who are
>> > waiting.
>> >
>> > A few commands:
>> >
>> > *gpsmon* # Check the GPS
>> > *chronyc* sources # Check the NTP clock
>> > *sensors*  # Check sensors, including the input voltage if using the HAT
>> 12
>> > V input.




Re: Beta Image Available #betaimage #draws

Basil Gunn
 

Mike,

Thank you very much for the screen shots. For me personally it means a
lot to hear of your success.

Since you are going to be using FLDigi you will need to turn direwolf
off before running that program.

I have a couple of scripts that allow you to do that in the following
directory:

~/n7nix/systemd/bin/

ax25-stop will unload all the ax.25 stuff & stop direwolf for your
current session. ie. if you reboot ax.25 & direwolf will be running
again.

ax25-disable will stop the ax.25 & direwolf services from loading
between RPi reboots.

This script in ~/bin will let you know what ax25 & direwolf processes
are running, would be good to run it before starting up FLDigi to be
sure direwolf has been stopped.

ax25-status

Also I am working on an install problem so there will be yet another
draws-beta image either today or tomorrow.

Thanks again for the screen shots.

/Basil n7nix



Mike - KB0FX <@KB0FX> writes:

John & Basil - Thank you very much for the Beta image and the additional
information on how to run the script to get Direwolf running. This morning
I did a greenfield install of the beta image on a brand new Raspberry Pi 3
Model B+ and everything just worked! So have I have GPS, Chrony and
Direwolf working. I am using a Icom IC-2720 on APRS. Hope to try FLDIGI
this afternoon. See my screen shots below.

Thanks

Mike - KB0FX



On Thu, Dec 13, 2018 at 12:01 PM Basil Gunn <@basil860> wrote:


If you want direwolf functionality with the draws hat do this:

cd
cd n7nix/config
sudo su
./app_config.sh core

This will run a script that sets up AX.25, direwolf & systemd

Now reboot your RPi & confirm your installation is working:

Receive
Tune your radio to the 1200 baud APRS frequency: 144.39 because there
should be lots of traffic there.

tail -f /var/log/direwolf/direwolf.log
or
become root & run listen -at in a console window

Transmit
Tune your radio to the 1200 baud APRS frequency: 144.39
cd
cd n7nix/debug
sudo su
./btest.sh -P [udr0|udr1]
This will send either a position beacon or a message beacon
with the -p or -m options.

Using a browser go to: https://aprs.fi/
Under Other Views, click on raw packets
Put your call sign followed by an asterisk in "Originating callsign"
Click search, you should see the beacon you just transmitted.

After that you can configure rmsgw, paclink-unix or someother packet
program that requires direwolf ie.:

./app_config.sh rmsgw
./app_config.sh plu

If you want to run some other program that does NOT use direwolf then do
this:
cd
cd bin
sudo su
./ax25-stop
This will bring down direwolf & all the ax.25 services.

I will put this in a markdown doc file later on today.

/Basil

John D Hays - K7VE <@john_hays> writes:

A Beta image is available for download at
http://nwdig.net/downloads/draws_beta2.zip

(This location may change.)

Unzip the file which will create draws_beta2.img
Use an SD Card of at least 8 GB and copy the img file with an image
burner
like Etcher <https://www.balena.io/etcher/> or dd under Linux.

Insert into Raspberry Pi (with DRAWS HAT)
Boot up. It will expand the file system to fill your SD card.

User: pi / nwcompass but it will autologin and present GUI.

Run *raspi-config* to set timezone and enable ssh and vnc if desired.

If the GPS antenna is installed:

*sudo systemctl enable gpsd*

*sudo systemctl start gpsdsudo systemctl restart chrony*

Explore the menu system and desktop Icons. (The Direwolf menu item is
broken.)

To start and stop direwolf use:

*sudo systemctl start direwolf*
*sudo systemctl stop direwolf*

Application support should be directed to the author of each application.
Use Raspbian support for OS questions. General questions can be asked in
this group. (Check Wiki as well)

There are many applications installed, you can see the install scripts in
/home/pi/n7nix and an install log in /var/log

More information will be provided, but getting this out for those who are
waiting.

A few commands:

*gpsmon* # Check the GPS
*chronyc* sources # Check the NTP clock
*sensors* # Check sensors, including the input voltage if using the HAT
12
V input.


Re: Beta Image Available #betaimage #draws

Mike - KB0FX
 

John & Basil - Thank you very much for the Beta image and the additional information on how to run the script to get Direwolf running. This morning I did a greenfield install of the beta image on a brand new Raspberry Pi 3 Model B+ and everything just worked! So have I have GPS, Chrony and Direwolf working. I am using a Icom IC-2720 on APRS. Hope to try FLDIGI this afternoon. See my screen shots below.

Thanks

Mike - KB0FX



On Thu, Dec 13, 2018 at 12:01 PM Basil Gunn <basil@...> wrote:

If you want direwolf functionality with the draws hat do this:

cd
cd n7nix/config
sudo su
./app_config.sh core

This will run a script that sets up AX.25, direwolf & systemd

Now reboot your RPi & confirm your installation is working:

Receive
Tune your radio to the 1200 baud APRS frequency: 144.39 because there
should be lots of traffic there.

tail -f /var/log/direwolf/direwolf.log
or
become root & run listen -at in a console window

Transmit
Tune your radio to the 1200 baud APRS frequency: 144.39
cd
cd n7nix/debug
sudo su
./btest.sh -P [udr0|udr1]
This will send either a position beacon or a message beacon
with the -p or -m options.

Using a browser go to: https://aprs.fi/
Under Other Views, click on raw packets
Put your call sign followed by an asterisk in "Originating callsign"
Click search, you should see the beacon you just transmitted.

After that you can configure rmsgw, paclink-unix or someother packet
program that requires direwolf ie.:

./app_config.sh rmsgw
./app_config.sh plu

If you want to run some other program that does NOT use direwolf then do
this:
cd
cd bin
sudo su
./ax25-stop
This will bring down direwolf & all the ax.25 services.

I will put this in a markdown doc file later on today.

/Basil

John D Hays - K7VE <john@...> writes:

> A Beta image is available for download at
> http://nwdig.net/downloads/draws_beta2.zip
>
> (This location may change.)
>
> Unzip the file which will create draws_beta2.img
> Use an SD Card of at least 8 GB and copy the img file with an image burner
> like Etcher <https://www.balena.io/etcher/> or dd under Linux.
>
> Insert into Raspberry Pi (with DRAWS HAT)
> Boot up.  It will expand the file system to fill your SD card.
>
> User: pi / nwcompass  but it will autologin and present GUI.
>
> Run *raspi-config* to set timezone and enable ssh and vnc if desired.
>
> If the GPS antenna is installed:
>
> *sudo systemctl enable gpsd*
>
> *sudo systemctl start gpsdsudo systemctl restart chrony*
>
> Explore the menu system and desktop Icons.  (The Direwolf menu item is
> broken.)
>
> To start and stop direwolf use:
>
> *sudo systemctl start direwolf*
> *sudo systemctl stop direwolf*
>
> Application support should be directed to the author of each application.
> Use Raspbian support for OS questions.  General questions can be asked in
> this group. (Check Wiki as well)
>
> There are many applications installed, you can see the install scripts in
> /home/pi/n7nix and an install log in /var/log
>
> More information will be provided, but getting this out for those who are
> waiting.
>
> A few commands:
>
> *gpsmon* # Check the GPS
> *chronyc* sources # Check the NTP clock
> *sensors*  # Check sensors, including the input voltage if using the HAT 12
> V input.




Re: Beta Image Available #betaimage #draws

Basil Gunn
 

With some browser go to to this site:

http://nwdig.net/downloads/

Look at what the file name is.
Click on that filename to download that file.
Just tested it. It works fine.

/Basil


Frank Ivan via Groups.Io <k0fei=me.com@groups.io> writes:

This gets a 404 error - you might want to upload it to BitBucket or GitHub.

73 - Frank - K0FEI


On Dec 14, 2018, at 9:17 AM, Dave Christensen <dkc2030@...> wrote:

The URL for the Beta image is now:

A Beta image is available for download at http://nwdig.net/downloads/draws_beta4.zip <http://nwdig.net/downloads/draws_beta2.zip>

I found Chrome better to download. Had multiple partial downloads with Micro$oft browsers.


Re: Beta Image Available #betaimage #draws

 

--


John D. Hays
Edmonds, WA
K7VE

   


Re: Beta Image Available #betaimage #draws

Steve, N9VW
 

John,
This link still tries to download:
    http://nwdig.net/downloads/draws_beta2.zip

/SvW, N9VW

On 12/14/2018 8:42 AM, John D Hays - K7VE wrote:

On Fri, Dec 14, 2018 at 8:30 AM Frank Ivan via Groups.Io <k0fei=me.com@groups.io> wrote:
This gets a 404 error - you might want to upload it to BitBucket or GitHub.

73 - Frank - K0FEI


On Dec 14, 2018, at 9:17 AM, Dave Christensen <dkc2030@...> wrote:

The URL for the Beta image is now:

A Beta image is available for download at http://nwdig.net/downloads/draws_beta4.zip

I found Chrome better to download.  Had multiple partial downloads with Micro$oft browsers.



--


John D. Hays
Edmonds, WA
K7VE

   



Re: Beta Image Available #betaimage #draws

 


On Fri, Dec 14, 2018 at 8:30 AM Frank Ivan via Groups.Io <k0fei=me.com@groups.io> wrote:
This gets a 404 error - you might want to upload it to BitBucket or GitHub.

73 - Frank - K0FEI


On Dec 14, 2018, at 9:17 AM, Dave Christensen <dkc2030@...> wrote:

The URL for the Beta image is now:

A Beta image is available for download at http://nwdig.net/downloads/draws_beta4.zip

I found Chrome better to download.  Had multiple partial downloads with Micro$oft browsers.



--


John D. Hays
Edmonds, WA
K7VE

   


Re: Beta Image Available #betaimage #draws

Ian
 

Knock the draws_beta4.zip off the end then click on the draws_beta4.zip when you get the webpage and it'll download.

Regards,
Ian..

On 2018-12-14 16:30, Frank Ivan via Groups.Io wrote:
This gets a 404 error - you might want to upload it to BitBucket or
GitHub.
73 - Frank - K0FEI

On Dec 14, 2018, at 9:17 AM, Dave Christensen <dkc2030@...>
wrote:
The URL for the Beta image is now:
A Beta image is available for download at
http://nwdig.net/downloads/draws_beta4.zip [1]
I found Chrome better to download. Had multiple partial downloads
with Micro$oft browsers.
Links:
------
[1] http://nwdig.net/downloads/draws_beta2.zip
[2] https://nw-digital-radio.groups.io/g/udrc/message/2202
[3] https://groups.io/mt/28739393/162806
[4] https://nw-digital-radio.groups.io/g/udrc/post
[5] https://groups.io/mk?hashtag=draws&subid=364574
[6] https://groups.io/mk?hashtag=betaimage&subid=364574
[7] https://nw-digital-radio.groups.io/g/udrc/editsub/162806
[8] https://nw-digital-radio.groups.io/g/udrc/leave/defanged


Re: Beta Image Available #betaimage #draws

Frank Ivan
 

This gets a 404 error - you might want to upload it to BitBucket or GitHub.

73 - Frank - K0FEI


On Dec 14, 2018, at 9:17 AM, Dave Christensen <dkc2030@...> wrote:

The URL for the Beta image is now:

A Beta image is available for download at http://nwdig.net/downloads/draws_beta4.zip

I found Chrome better to download.  Had multiple partial downloads with Micro$oft browsers.