Date   

Re: People receiving boards #draws-manager #setup #draws

Richard Waller <rewaller@...>
 

Thanks Jack. I  will check that. Rick. Ka4ohm 


On Apr 3, 2019, at 8:57 PM, Jack Spitznagel <kd4iz@...> wrote:

Rick,

 

Might be a little counter-intuitive, but in my install of Beta 10 all of the fldigi-related program icons are in the “Internet” drop down menu selections along with Xastir (which is also on the X desktop). I guess that Basil did not set up a dedicated Ham Radio group in his configuration.

 

KD4IZ

Jack Spitznagel

FM19oo

 

 

 

From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Richard Waller via Groups.Io
Sent: Wednesday, April 3, 2019 19:37
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] People receiving boards #draws #draws-manager #setup

 

Greetings John. I have installed the Draws image to my Rpi. I don’t see fldigi listed under Hf programs. Is that correct? Rick Waller Ka4ohm 


On Mar 23, 2019, at 5:34 PM, John D Hays - K7VE <john@...> wrote:

If you are unpacking your new DRAWS™ HAT, here are a couple of resources to get started:

https://www.youtube.com/watch?v=v5C3cWVVz_A
(Be sure to do the git pull, to update as new features are being added .- including a new button to update DRAWS™ Manager)

 

--

 


John D. Hays
Edmonds, WA

K7VE

 

   

 


--
J Spitznagel
Science River LLC
KD4IZ


Re: People receiving boards #draws-manager #setup #draws

Richard Waller <rewaller@...>
 

Basil, I’m looking at the files in the draws directory. Under hfapps I see wsjt-x and two other folders I don’t recognize but no fldigi. Rick. Ka4ohm

On Apr 3, 2019, at 8:54 PM, Basil Gunn <basil@pacabunga.com> wrote:


This is the link to a list of all the programs installed on the image:
https://github.com/nwdigitalradio/n7nix/blob/master/docs/IMAGE_README.md

FLdigi is definitely installed. If you need to install from a gui click
the raspberry icon in the top left corner, then click Internet, then
click fldigi.

Where exactly are you looking?

/Basil


Richard Waller via Groups.Io <rewaller=verizon.net@groups.io> writes:

Greetings John. I have installed the Draws image to my Rpi. I don’t
see fldigi listed under Hf programs. Is that correct? Rick Waller
Ka4ohm


Re: People receiving boards #draws-manager #setup #draws

Basil Gunn
 

Might be a little counter-intuitive, but in my install of Beta 10 all
of the fldigi-related program icons are in the “Internet” drop down
menu selections along with Xastir (which is also on the X desktop).

I guess that Basil did not set up a dedicated Ham Radio group in his
configuration.
Nope I leave that up to the guys that maintain those particular apps. If
you have problems with any of those apps or how they get installed
please let them know.

/Basil


Re: People receiving boards #draws-manager #setup #draws

Jack Spitznagel
 

Rick,

 

Might be a little counter-intuitive, but in my install of Beta 10 all of the fldigi-related program icons are in the “Internet” drop down menu selections along with Xastir (which is also on the X desktop). I guess that Basil did not set up a dedicated Ham Radio group in his configuration.

 

KD4IZ

Jack Spitznagel

FM19oo

 

 

 

From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Richard Waller via Groups.Io
Sent: Wednesday, April 3, 2019 19:37
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] People receiving boards #draws #draws-manager #setup

 

Greetings John. I have installed the Draws image to my Rpi. I don’t see fldigi listed under Hf programs. Is that correct? Rick Waller Ka4ohm 


On Mar 23, 2019, at 5:34 PM, John D Hays - K7VE <john@...> wrote:

If you are unpacking your new DRAWS™ HAT, here are a couple of resources to get started:

https://www.youtube.com/watch?v=v5C3cWVVz_A
(Be sure to do the git pull, to update as new features are being added .- including a new button to update DRAWS™ Manager)

 

--

 


John D. Hays
Edmonds, WA

K7VE

 

   

 


--
J Spitznagel
Science River LLC
KD4IZ


Re: People receiving boards #draws-manager #setup #draws

Basil Gunn
 

This is the link to a list of all the programs installed on the image:
https://github.com/nwdigitalradio/n7nix/blob/master/docs/IMAGE_README.md

FLdigi is definitely installed. If you need to install from a gui click
the raspberry icon in the top left corner, then click Internet, then
click fldigi.

Where exactly are you looking?

/Basil


Richard Waller via Groups.Io <rewaller=verizon.net@groups.io> writes:

Greetings John. I have installed the Draws image to my Rpi. I don’t
see fldigi listed under Hf programs. Is that correct? Rick Waller
Ka4ohm


Re: People receiving boards #draws-manager #setup #draws

 

Basil puts together the images, but it should be installed,  try typing fldigi into a terminal window.

On Wed, Apr 3, 2019 at 5:01 PM Richard Waller via Groups.Io <rewaller=verizon.net@groups.io> wrote:
Greetings John. I have installed the Draws image to my Rpi. I don’t see fldigi listed under Hf programs. Is that correct? Rick Waller Ka4ohm 


On Mar 23, 2019, at 5:34 PM, John D Hays - K7VE <john@...> wrote:

If you are unpacking your new DRAWS™ HAT, here are a couple of resources to get started:
https://www.youtube.com/watch?v=v5C3cWVVz_A
(Be sure to do the git pull, to update as new features are being added .- including a new button to update DRAWS™ Manager)

--


John D. Hays
Edmonds, WA
K7VE

   



--


John D. Hays
Edmonds, WA
K7VE

   


Re: People receiving boards #draws-manager #setup #draws

Richard Waller <rewaller@...>
 

Greetings John. I have installed the Draws image to my Rpi. I don’t see fldigi listed under Hf programs. Is that correct? Rick Waller Ka4ohm 


On Mar 23, 2019, at 5:34 PM, John D Hays - K7VE <john@...> wrote:

If you are unpacking your new DRAWS™ HAT, here are a couple of resources to get started:
https://www.youtube.com/watch?v=v5C3cWVVz_A
(Be sure to do the git pull, to update as new features are being added .- including a new button to update DRAWS™ Manager)

--


John D. Hays
Edmonds, WA
K7VE

   


locked Re: My DRAWS arrived, video inside

Andy M0NWE <House@...>
 

 
Really, you waste bandwidth because your government charges import taxes.  Try living in Europe. Suck it up.

On 3 Apr 2019, at 22:02, Don Poaps <va7dgp@...> wrote:

This sort of Sucks. I have to pay 30.00 CDN duty to receive the Draws. The custom declaration should have said Amateur Radio use. Unless President Trump and Mexico changed the rules and didn’t let as Canadian know.
 
Don va7dgp 

 


[Moderator: This thread has gone off topic and is now locked, no additional replies will be added.]


locked Re: My DRAWS arrived, video inside

 

Let's stay on the subject of this topic.

Taxes and Politics don't belong here.  Two thoughts to keep in mind:
1. NW Digital Radio has received requests from time to time to falsify customs declarations to affect taxes and tariffs. It is company policy that we will not honor such requests.
2. If you feel there is additional information that would be helpful to our shipping department, include it in the comments section when placing an order.

We appreciate your business.

On Wed, Apr 3, 2019 at 1:14 PM Fred Meier <fsmeier@...> wrote:

Hi Don.

Amateur radio use is not exempt from taxes and duties. The Post Office has to collect both when they are the broker of your USA goods.

Mr Trump and the Mexicans have nothing to do with this. Your Prime Minister is the cause of the confusion. He has not brought the agreement in principle forward to be ratified by parliament.

I just went through this with the Draws myself, believing what I heard in the news that we could now shop online up to a certain new limit, bla bla bla. It is all just bla bla bla intended to distract western Canadians from the train wreck in Ottawa.

Just thought you might like to know.

Fred VE7FMN

 

From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Don Poaps
Sent: Wednesday, April 3, 2019 1:02 PM
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] My DRAWS arrived, video inside

 

This sort of Sucks. I have to pay 30.00 CDN duty to receive the Draws. The custom declaration should have said Amateur Radio use. Unless President Trump and Mexico changed the rules and didn’t let as Canadian know.

 

Don va7dgp


--


John D. Hays
Director

  


   


locked Re: My DRAWS arrived, video inside

Fred Meier <fsmeier@...>
 

Hi Don.

Amateur radio use is not exempt from taxes and duties. The Post Office has to collect both when they are the broker of your USA goods.

Mr Trump and the Mexicans have nothing to do with this. Your Prime Minister is the cause of the confusion. He has not brought the agreement in principle forward to be ratified by parliament.

I just went through this with the Draws myself, believing what I heard in the news that we could now shop online up to a certain new limit, bla bla bla. It is all just bla bla bla intended to distract western Canadians from the train wreck in Ottawa.

Just thought you might like to know.

Fred VE7FMN

 

From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Don Poaps
Sent: Wednesday, April 3, 2019 1:02 PM
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] My DRAWS arrived, video inside

 

This sort of Sucks. I have to pay 30.00 CDN duty to receive the Draws. The custom declaration should have said Amateur Radio use. Unless President Trump and Mexico changed the rules and didn’t let as Canadian know.

 

Don va7dgp 

 

On Wed, Apr 3, 2019 at 12:10 John D Hays - K7VE <john@...> wrote:

By default gpsd is installed as well as chrony (ntpd) which will update the clock.  There are several threads in topics, as well as some wiki documentation to help you out.

 

If you want to access the GPS directly you would need to turn off gpsd and open /dev/ttySC0  

 

Use gpsmon, cgps, and/or gpspipe to access GPS information from gpsd.

 

On Wed, Apr 3, 2019 at 12:05 PM Fred Hirsch via Groups.Io <Hirschfh=aol.com@groups.io> wrote:

John look forward to next video.  Have DRAWS software up and running.  Now to figure out the apps.  Can I directly access the GPS?

Does DRAWS update the Raspberry time from GPS?

Fred Hirsch

-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Wed, Apr 3, 2019 11:22 am
Subject: Re: [udrc] My DRAWS arrived, video inside

Thanks Steve, I am sure you will do a great job, like the 1st one.

 

On Wed, Apr 3, 2019 at 10:19 AM Steve McGrane <temporarilyoffline@...> wrote:

Next video should be out Friday or Sunday... trying to figure out the best script for it!

 

 

 


John D. Hays
Edmonds, WA

K7VE

 

Image removed by sender. Image removed by sender. Image removed by sender. Image removed by sender.

 


 

--

 


John D. Hays
Edmonds, WA

K7VE

 

Image removed by sender. Image removed by sender. Image removed by sender. Image removed by sender.

 

--

Don Poaps

New Westminster, BC

VA7DGP DATA

VA7QU   VOICE

 

 

Winlink: va7qu@...

Subject://wl2k           

 

 

 

Image removed by sender.                    

Image removed by sender.Image removed by sender.  

 

 

 

 

 


locked Re: My DRAWS arrived, video inside

Don Poaps
 

This sort of Sucks. I have to pay 30.00 CDN duty to receive the Draws. The custom declaration should have said Amateur Radio use. Unless President Trump and Mexico changed the rules and didn’t let as Canadian know.

Don va7dgp 

On Wed, Apr 3, 2019 at 12:10 John D Hays - K7VE <john@...> wrote:
By default gpsd is installed as well as chrony (ntpd) which will update the clock.  There are several threads in topics, as well as some wiki documentation to help you out.

If you want to access the GPS directly you would need to turn off gpsd and open /dev/ttySC0  

Use gpsmon, cgps, and/or gpspipe to access GPS information from gpsd.

On Wed, Apr 3, 2019 at 12:05 PM Fred Hirsch via Groups.Io <Hirschfh=aol.com@groups.io> wrote:
John look forward to next video.  Have DRAWS software up and running.  Now to figure out the apps.  Can I directly access the GPS?
Does DRAWS update the Raspberry time from GPS?
Fred Hirsch


-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Wed, Apr 3, 2019 11:22 am
Subject: Re: [udrc] My DRAWS arrived, video inside

Thanks Steve, I am sure you will do a great job, like the 1st one.

On Wed, Apr 3, 2019 at 10:19 AM Steve McGrane <temporarilyoffline@...> wrote:
Next video should be out Friday or Sunday... trying to figure out the best script for it!




John D. Hays
Edmonds, WA
K7VE

   



--


John D. Hays
Edmonds, WA
K7VE

   

--
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU   VOICE


Winlink: va7qu@...
Subject://wl2k           



                    
  




 


locked Re: My DRAWS arrived, video inside

 

By default gpsd is installed as well as chrony (ntpd) which will update the clock.  There are several threads in topics, as well as some wiki documentation to help you out.

If you want to access the GPS directly you would need to turn off gpsd and open /dev/ttySC0  

Use gpsmon, cgps, and/or gpspipe to access GPS information from gpsd.

On Wed, Apr 3, 2019 at 12:05 PM Fred Hirsch via Groups.Io <Hirschfh=aol.com@groups.io> wrote:
John look forward to next video.  Have DRAWS software up and running.  Now to figure out the apps.  Can I directly access the GPS?
Does DRAWS update the Raspberry time from GPS?
Fred Hirsch


-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Wed, Apr 3, 2019 11:22 am
Subject: Re: [udrc] My DRAWS arrived, video inside

Thanks Steve, I am sure you will do a great job, like the 1st one.

On Wed, Apr 3, 2019 at 10:19 AM Steve McGrane <temporarilyoffline@...> wrote:
Next video should be out Friday or Sunday... trying to figure out the best script for it!




John D. Hays
Edmonds, WA
K7VE

   



--


John D. Hays
Edmonds, WA
K7VE

   


locked Re: My DRAWS arrived, video inside

Hirschfh@...
 

John look forward to next video.  Have DRAWS software up and running.  Now to figure out the apps.  Can I directly access the GPS?
Does DRAWS update the Raspberry time from GPS?
Fred Hirsch


-----Original Message-----
From: John D Hays - K7VE <john@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Wed, Apr 3, 2019 11:22 am
Subject: Re: [udrc] My DRAWS arrived, video inside

Thanks Steve, I am sure you will do a great job, like the 1st one.

On Wed, Apr 3, 2019 at 10:19 AM Steve McGrane <temporarilyoffline@...> wrote:
Next video should be out Friday or Sunday... trying to figure out the best script for it!




John D. Hays
Edmonds, WA
K7VE

   


Re: Latest JS8CALL (1.0.0) #draws #js8call

Basil Gunn
 

The following instructions updates most programs including js8call
for users running a NW Digital Radio RPi image.

# Get the program refresher script:
cd
cd n7nix
git pull

# Run the program refresher script:
# The refresher script is in this directory ~/n7nix/bin/
cd bin
./prog_refresh.sh

/Basil

John D Hays - K7VE <john@hays.org> writes:

Visit http://files.js8call.com/latest.html and pull down --
js8call_1.0.0_armhf.deb

You can use a browser or the wget command

*wget http://files.js8call.com/1.0.0/js8call_1.0.0_armhf.deb
<http://files.js8call.com/1.0.0/js8call_1.0.0_armhf.deb>*

Go to the directory where you saved the file and run

*sudo apt-get install ./js8call_1.0.0_armhf.deb*


locked Re: My DRAWS arrived, video inside

 

Thanks Steve, I am sure you will do a great job, like the 1st one.

On Wed, Apr 3, 2019 at 10:19 AM Steve McGrane <temporarilyoffline@...> wrote:
Next video should be out Friday or Sunday... trying to figure out the best script for it!




John D. Hays
Edmonds, WA
K7VE

   


locked Re: My DRAWS arrived, video inside

Steve McGrane <temporarilyoffline@...>
 

Next video should be out Friday or Sunday... trying to figure out the best script for it!



On Wed, Apr 3, 2019 at 11:04 AM John D Hays - K7VE <john@...> wrote:
Hi Fred,

We are all anxiously awaiting Steve's next installment.

In the meantime, what his video shows is burning the image to a new/blank/reused SD Card.  Once you have the SD card burned and ready to go, the DRAWS™ HAT is mounted to a Raspberry Pi (Any of models 2 through 3+) and the SD card is inserted to the Raspberry Pi for bootup. 

 If you have a monitor, keyboard, and mouse plugged in, you should see the system come up when you power it on.


On Wed, Apr 3, 2019 at 8:06 AM Hirschfh via Groups.Io <Hirschfh=aol.com@groups.io> wrote:
UNDERSTAND VIDEO 1,  WHERE IS THE NEXT PROMISED BOOT UP VIDEO.  IS THE RASPBERRY PI INSTALLED ON THE SD CHIP WHERE I AM ETCHING TO?  OR IS THE SD CHIP BLANK?

THANKS, FRED



--


John D. Hays
Edmonds, WA
K7VE

   


Re: Success

Basil Gunn
 

Jeff Francis™ <jeff@gritch.org> writes:

The update might be worth scripting for the less
technical users, ...
Why is there a BETA11 image?
Because js8call was updated from 1.0.0-rc3 to final 1.0.0 after BETA10
was uploaded and the package url location changed.

If you are already using BETA9 or BETA10 images should you download a new image?
NO.
To update to the latest files on BETA11 do the following:

# Get the program refresher script:
cd
cd n7nix
git pull

# Run the program refresher script:
# The refresher script is in this directory ~/n7nix/bin/
cd bin
./prog_refresh.sh

If a new version of FLdigi is to be installed the script will change the
swap file size and you will be asked to reboot. Upon reboot just run the
prog_refresh.sh script again.

This is what the output of the prog_refresh.sh script looks like on an
up-to-date system:

cd ~/n7nix/bin
$ ./prog_refresh.sh
Update scripts in n7nix directory
Already up-to-date.
Refresh local bin directory

FINISHED copying bin files

FINISHED copying AX.25 files
Update draws manager
Already up-to-date.
Update HF programs
Swap file size check: 100M
Update HF apps after checking version numbers.

js8call: current version: 1.0.0, installed: 1.0.0
version is current
wsjtx: current version: 2.0.1, installed: 2.0.1
version is current
Library: libflxmlrpc IS loaded.
flxmlrpc: current version: 0.1.4, installed: 0.1.4
version is current
fldigi: current version: 4.1.01, installed: 4.1.01
version is current
flrig: current version: 1.3.42, installed: 1.3.42
version is current
flmsg: current version: 4.0.8, installed: 4.0.8
version is current
flamp: current version: 2.2.04, installed: 2.2.04
version is current

2019 04 03 09:06:13 PDT: hf_verchk.sh: hf program update script FINISHED

2019 04 03 09:06:13 PDT: prog_refresh.sh: Program Refresh script FINISHED

/Basil n7nix

Jeff Francis™ <jeff@gritch.org> writes:

That worked, thank you. The update might be worth scripting for the less
technical users, but had no errors. Do not yet have a radio wired up, just
received my Hat in the mail late Friday afternoon.

Jeff/N0GQ


On Mon, Apr 1, 2019 at 10:55 AM Basil Gunn <basil@pacabunga.com> wrote:


Jeff,

Speaking of beta10, does an "apt-get dist-upgrade" get me to the same
place
as downloading and installing beta10?
In a perfect world yes, so NO.


locked Re: My DRAWS arrived, video inside

 

Hi Fred,

We are all anxiously awaiting Steve's next installment.

In the meantime, what his video shows is burning the image to a new/blank/reused SD Card.  Once you have the SD card burned and ready to go, the DRAWS™ HAT is mounted to a Raspberry Pi (Any of models 2 through 3+) and the SD card is inserted to the Raspberry Pi for bootup. 

 If you have a monitor, keyboard, and mouse plugged in, you should see the system come up when you power it on.


On Wed, Apr 3, 2019 at 8:06 AM Hirschfh via Groups.Io <Hirschfh=aol.com@groups.io> wrote:
UNDERSTAND VIDEO 1,  WHERE IS THE NEXT PROMISED BOOT UP VIDEO.  IS THE RASPBERRY PI INSTALLED ON THE SD CHIP WHERE I AM ETCHING TO?  OR IS THE SD CHIP BLANK?

THANKS, FRED



--


John D. Hays
Edmonds, WA
K7VE

   


locked Re: My DRAWS arrived, video inside

Hirschfh@...
 

UNDERSTAND VIDEO 1,  WHERE IS THE NEXT PROMISED BOOT UP VIDEO.  IS THE RASPBERRY PI INSTALLED ON THE SD CHIP WHERE I AM ETCHING TO?  OR IS THE SD CHIP BLANK?

THANKS, FRED


locked Re: My DRAWS arrived, video inside

 

Excellent 


On Tue, Apr 2, 2019, 12:44 Steve McGrane <temporarilyoffline@...> wrote:

The wiki page is worth 30 words (I counted)... and a picture is worth 1000 words so they say, then this video must be worth at least 1030 words.  So here are my 1030 words on the subject.

I go over receiving the board and burning the image from the command line and also from the GUI using etcher.

Stay Tuned for more!
- Steve, KM9G

3001 - 3020 of 5981